Area of the Part of a Sphere

If $tR$ and let the two spherical surfaces intersect along a circle of radius $r$ (if they do not intersect the result is once again trivial): the part of the larger sphere contained inside the smaller sphere is a spherical cap, the smaller of the two spherical caps on the larger sphere having the said circle as base.The area of the smaller spherical cap of base radius $r$ is given by $S(

ho)=2pi

ho(

ho-sqrt

ho^2-r^2)$, where $

ho$ is the radius of the sphere. This is a decreasing function of $

ho$ (when $r$ is fixed), so we have $S(t)

Area of the Part of a Sphere 1

1. How does cement dry underwater?

Simply put: Cement does not would ry', it hydrates. It's a chemical reaction. the cement combines with water to form crystals that bind it, (and the sand normally mixed in), together. The water becomes part of the 'new rock' formed.

2. What is the part called?

keyswitch tang

Area of the Part of a Sphere 2

3. Is galaxy a part of space?

in probably the simplest and most primitive sense... think of the "sky" as space and the "sun" as a "a galaxy" a galaxy is actually millions of suns, in the vast black emptiness of space, but the "comparison" is similar

4. Is death part of life?

No need to ask why, there is nothing that can satisfy the questioning that involves this why. There is night and day There is high and low tide There is beginning and end There is life and deathIt's all part of existence. It's all a process. We live in abundant death and die to live. It's biology, it's, as William Ranger said, astrology, and it's all perception.

5. What if I don't activate Windows 7?

"I installed Windows 7 (an OEM version, basically a free upgrade)" If W7 was part of last year's free Upgrade from Vista Coupon Offer from your laptop manufacturer, you must re-install Vista before you can do the W7 Upgrade from within Vista. And, the W7 Activation Code is printed on the packaging included with the W7 Upgrade Kit. You can not use the Activation Code from the COA Sticker on your laptop, it's for Vista ONLY.

6. What is this Chrysler part?

There called applique I work for GM and thats what there called on the part boxes like liftgate handle appliques we replace the ones on Saturn outlooks and chevy traverses

7. Are you part of the problem, or part of the solution?

I am the problem :P and the solution

8. Can you be a straight guy yet enjoy having sex with other men who are gay?

You can still call yourself straight if you want to; the definitions of sexual identity are not carved into stone tablets somewhere. But they are part of human languages and cultures. Hardly anybody will believe that you are straight once you tell them you also enjoy sex with your own gender. They will figure you are actually bisexual and in denial, or something like that. You probably wo not be able to convince them otherwise. Ultimately, you are who you are, no matter what label you put on yourself, or what others think of you.

9. I am looking for an imposing dog breed which can be a hiking companion (long hikes, 20 miles ), offer a bit of protection when I hike alone and which won't kill my cats. What do you suggest?

You might consider Chesapeake Bay Retriever. Mine weighs 105lbs, but generally males weigh 80-85 . They are incredible strong, extremely intelligent and very protective of their owners family and property. They do not have a kill gene and I doubt they would ever fatally wound anyone, but they will not back down to what they perceive to a threat. Out of the many retriever breeds, Chessies are the most protective. If your cat is part of your family, it will be part his. Chesapeake Bay Retrievers are sturdy looking dogs and most aspects of their appearance are made for water. They have a double coat in which the under layer is soft, dense, woolly and oily. The oiliness of the skin and undercoat further protect them from freezing waters in cold climates by making them water resistant. Every facet of this breed's physique lends to powerful swimming skills. They have incredible endurance.Experts contend this breed of retrievers is the most protective and loyal of all the retrievers. Members of this breed are intuitive, lively, loyal and affectionate. These traits allow them to be excellent partners for hunters as well as loving and protective members of the family. This breed is intuitive enough to bring back the hunter's bird with a gentle bite that does no further damage. This breed will be take upon the task of protecting your yard, family, pets, etc. with tremendous seriousness. Chesapeake Bay Retrievers have a mind of their own. This is a breed that does what they want, how they want. But, they are ultimately big softies who respond well to positive reinforcement training. The Chessie can be stubborn and willful. Inexperienced or new dog owners will find life easier with another dog breed. This is a breed that requires firm, consistent training by everyone in the household and it must start early. . Avoid letting your Chesapeake Bay Retriever do something "just one time" or you'll spend too much time retraining them. With the proper training and socialization, the Chesapeake Bay Retriever is an amazing companion.I am looking for an imposing dog breed which can be a hiking companion (long hikes, 20 miles ), offer a bit of protection when I hike alone and which wo not kill my cats. What do you suggest?

GET IN TOUCH WITH US
you might like
no data
recommended articles
Am I Sexist If I Think Men Are Boring & for the Most Part, Useless in Relationships? I'm Not Trying
Am I Sexist If I Think Men Are Boring & for the Most Part, Useless in Relationships? I'm Not Trying
Am I sexist if I think men are boring & for the most part, useless in relationships? I'm not trying to be mean?Some men do make for horrible conversation. All they do is watch sports and play games.most but not all men. Alot of men are fun though. Most men I've found do not like to talk about their feelings and problems like women do. .so aggravating. Go on a dating site and find one that likes intelligent conversation.just do not **** them before you find out. Good luck— — — — — —Starts out without color. Later colors start appearing.?Wizard of Oz? I agree, you are probably thinking of Pleasantville. I liked the movie for the most part, but not the ending— — — — — —Has Ireland industrialized, or is it still country for the most part?I went to ireland in may, and it had some fantastic countryside/rolling hills, etc. It was a great trip. there are some nice cities/small towns, but there are a lot of extremely rural areas.— — — — — —what is this tingly feeling? i'm 14 and a girl?It is perfectly normal. you are growing up and your body is telling you it's sexually mature. Do not take that as your body saying 'ok let go get some' though, your body is ready but you may not be mentally. For the most part it is accepted and with the rise in young/teen pregnancies I kinda think it is preferred by some parents.— — — — — —Why, for the most part, did the use of changing surnames (Ex. Johnson for son of John) stop in many countries?A great question! There's only a footnote left after Bears* post: After mobility and communications rendered "son/daughter of.." confusing, place names to identify a person's home or origin became a popular alternative for genealogy. The use of place names was already in use for noble families, hence it's expansion to apply to commoners was a familiar practice and inherent to feudalism. Next in popularity is the use of crafts and professions. For that reason "smith" is the most common English name due to widespread practice of the craft. Asian nomenclature is a different matter altogether, where last names were much slower to be used. In Central Asia a single name is still common. For example, the largest part of Korea's populace share five last names of historic significance. Therefore requests for marriage licenses require a genealogical search to document the absence of inbreeding. In Vietnam, the most common last name is Nguyen, who was the ruler of the first dynasty to unite the nation. Ideographs used in Chinese and Japanese result in an altogether different pattern, due to the ease of combining character into more descriptive names.— — — — — —Older men Please ....for the most part ...do you like woman in jeans the most?i like ladys in jeans but i like them to be comfertble so if she preferd somthing more comfertable i would be even more happy— — — — — —Catholics: Why do you believe for the most part in a works salvation?The Biblical passage about faith without works being dead is important to the Catholic worldview. I am a former Catholic, but was raised in a Catholic home and attended Catholic schools. We were taught that acts of charity and social justice are hugely important. It's not enough to just show up at church on Sunday, say a few prayers and then walk away forgetting about your religious and moral obligations. We are to honor God's creations (the planet, and the animals and people that live upon it) by showing kindness and compassion. Without charity and compassion, there's not not much of a religion left. Catholicism is not an armchair religion in which you say a little prayer and then get to look down smugly upon others for the rest of your life. Here is a poem by St. Teresa of Avila that sums it up rather nicely: Christ has no body now on earth but yours, no hands but yours, no feet but yours, Yours are the eyes through which to look out Christ's compassion to the world Yours are the feet with which he is to go about doing good; Yours are the hands with which he is to bless men now.— — — — — —Who should be blamed for the current economic crisis?I think it's a combination of both because of all of the deregulation but it's, for the most part, the fault of the private institutions. This is a direct result of greed and poor judgment and we are all paying the price
Is There a Chemical That Quickly Washes Engine Parts?
Is There a Chemical That Quickly Washes Engine Parts?
Try formula one car spray it make easy to easier unwanted spots1. what is the pridedure of reverse engineering for manufacturing aviation engine parts?if you are seeking PMA approval from the FAA for the manufacture of these parts you need first to go to the FAA regulations governing PMA application. OEM manufacturers also deal with the FAA, but you will not get any engineering data about their products from the FAA as it is considered proprietary in nature. PMA is granted on the bases of test and computation where by you must reverse engineer the part creating your own drawings and specifications, manufacture a test sample then test your part back to back with the OEM part proving it to be as good or better fit, form and function. this will require a full test report and first piece inspection subbmitted to the FAA engineering department for their approval. Your eligibility list for this part will have to be proved to the FAA by documentation of the part number that the OEM assigned as it may be referenced in maintenance manuals and such. Your part will have it's own unique part number to referance as a replacment for the original. manufacturing of this item must be done in the U.S. to allow continuous monitoring by the FAA and your manufacturing and quality inspection system must be approved by the FAA as well. The FAA is your customer, as such all product that you make for the flying public will be traceable and the FAA will enforce all governing rules and regulations pertaining to the distribution, use and sale of your products. You will maintain records and stand audits as deemed nessecary by the FAA. On the specifics of reverse engineering, a good engineer should be very well versed in this. some of the fine points. material composition such as alloy done by metallurgical tests. tolerance and dimensional criteria by inspection CMM inspection works good along with other acceptable methods. weight by a calibrated scale. performance and strength by test and computation by acceptable methods and practices.2. Why did supersonic passenger jets like the Concorde always cruise at near maximum speed? Wouldn't it burn excessive fuel and wear out engine parts sooner?Concord was designed and built to go fast. That's why it was so popular with certain people and airlines. Why would you create a product and then derate its intended design performance and defeat its purpose?.3. Where could I find some low priced, good quality engine parts?check for rebuilt engines/gonna be cheaper and better than what you are doing/dont forget conn rods and cam and head work4. What is LTL freight mean?It means "Less Than Load," or, sometimes, "Less than Trailer Load." It refers to companies like Yellow and Roadway that pull trailers that have freight from a number of different people. There might be a pallet of engine parts, a box of furniture, something as small as one small box, or as large as a full trailer. The freight is usually moved in steps, going from one city to the next, and no driver goes farther than one day's drive from his home terminal. It can be very profitable, but many companies have gone out of business. UPS and FedEx both have LTL divisions, also.5. do harleys vibrate out engine parts?No even though that is what everyone says but that is not true, because i have a 1998 Harley Davidson electroglide and it has just a little over 70,000 miles and it runs just as good as the day i bought it, and nothing has vibrated out of the motor6. What do I do with a lemon appliance?Am I correct in thinking that the problems with the dishwasher are being blamed on something that you have done? Did you use sulfuric acid instead of dishwasher detergent? Did you try to degrease engine parts in the dishwasher? What do they say you have done!?! If you have a bona fide complaint about the machine -- and they have not been able to fix it under warranty, I would call the local Sears store tomorrow morning and tell them to come get the damned thing and refund your money! I would definitely let Frigidaire know that the machine is junk and the warranty is not getting it fixed. I would get in touch with the credit card company and dispute the bill. Even if they do not offer a warranty, they should take your side if you are being swindled. I would raise so much hell with all of these folks that they would be glad to refund my money just to get me off their back! Get mad and get going on this!
How Can I Make My New Apartment Kitchen Look Less Dingy?
How Can I Make My New Apartment Kitchen Look Less Dingy?
How can I make my new apartment kitchen look less dingy?changing the bulbs would be a cheap start— — — — — —DC Circuits. Physics. Please Help!?Since you have the two resistances and the current, it is best to use this version of the power equation: P = I^2 * R So for the bulbs, Pb = 0.24^2 * 409 = 23.56A (.) For the leads, Pl = 0.24^2 * 1.8 = 0.104A Wasted fraction = Pl / (Pb Pl) = 0.44%— — — — — —Will my bulbs live if I don't plant them this year but next year? ?Could you plant them in a pot? I am afraid that extended dormancy would kill the bulbs. It should be allowed to grow so that it can renew itself. An onion is a bulb and will remain dormant for several months, but then sends up a sprout when it "knows" that it's time to grow again even if it's still in the refrigerator veggie drawer. If it's not planted, it dies. So if you want to have them next year, they will have to grow this year. Oh by the way, bulbs should be stored in a dry, dark place in the open air. an onion sack is the ideal container. Dormant bulbs must breath to stay alive, so the air tight container wo not work. Happy Gardening!.— — — — — —I need help with my car!?check if the bulbs are busted, if yes, replace the busted bulbs. what i did to my dashboard was dismantled the gauge cluster and wipe the inside of the glass cover, Voila! brighter as ever— — — — — —The turn signals on my 1996 GMC Sonoma have stopped working. What should I do about it?What you are experiencing is a shorted multifunction switch. I am assuming all of your light bulbs are working properly. If the bulbs are not all working, fix this first and recheck. If you still have a solid arrow or it flashes like ten bear, you will have to replace the switch and harness inside the steering column. Good luck— — — — — —radio,wipers, tail lights, break lights, head lights, blinkers not working but van starting just fine.?you will not think of that the two bulbs could flow out on the comparable time, yet i could definately verify that first. that's an undemanding verify, and can shop you from having to tear right into a team of electric powered stuff. If the brake gentle interior the lower back window is working, the change, relay, etc. is probable functioning o. k. . Definately verify the bulbs first.— — — — — —Will brightness of 4 CFL bulbs reduce if i connect them in series in AC wiring ?If you put four CFL's in series they probably wo not work at all. Unlike an incandescent bulb, the compact fluorescent relies on an electronic circuit to generate the high-voltage high-frequency current that passes through the actual tube and causes it to light up. If you have bulbs rated for 120 V then you could put two in series to run on 240 volts. If I am reading your query correctly the bulbs you have are rated to operate on any voltage between 110 and 250 V. However if that is actually the case, then each of the two bulbs will operate at full brightness.— — — — — —my daughter has a science project she wants to build a house with working lights using batteries any ideas?I do not understand the difficulty. You do need to be familiar with wiring, and how to wire parallel circuits. Get a 6 volt lantern battery and a bunch of 6 volt (or higher) flashlight bulbs. Get holders for the bulbs at someplace like radio shack. wire the bulbs to the battery, all in parallel.— — — — — —What does it mean if my light bulbs are burning out much faster than they should?Do not rely on help for this problem here. It's not the bulbs, it's the wiring. It's probably easy enough to fix, but call an electrician before there's a fire. A real electrician, not the guy who thinks he's an electrician. Seriously.— — — — — —Halogen Lights blown after heater fitted - circuit problem?If you mean by blown that they burnt the inside element or physically crack the glass. If busted glass, someone is handling the bulbs with their dirty hands
Why System Testing Costs Are Particularly High for Generic Software Product?
Why System Testing Costs Are Particularly High for Generic Software Product?
Why system testing costs are particularly high for generic software product?Wow! Thankss! Exactly what I was searching for. I looked for the answers on the internet but I could not find them— — — — — —How to keep a big and complex software product maintainable over the years?Clean rotted code by refactoring, while writing unit tests.Have a leader who is knowledgeable about the current design. If not, read the project's code until you are knowledgeable.Read refactoring books— — — — — —List out the best meeting software products?Cisco WebEx is the right solution for Online meetings. You can stream HD Video, Audio, Screen share, white board, chat, Meeting recording and many features available. We are the service provider of Cisco WebEx. If interested, reach me at 91 9948240937 or email: .in/sign-up— — — — — —What is software product testing?Testing the software products using tools.and sometimes manually.that means checking programmes whether they are executing correctly or not. For more info or services please visit us:— — — — — —Software ProductsMimioStudio is a Power-Point-like application with unique features added to enable interactivity and, through the MimioMobile add-on, to push interactive instructional activities and assessments out to student iPad and Android tablets and SmartPhones. As of 2015, Mimio has the following classroom technology products: MimioTeach; MimioProjector 280, 280I and 280T; MimioDisplay 550T, 650T, 700T, and 840T; MimioBoard 780T and 870T; MimioCapture3; MimioPad2; MimioView 340H; MimioVote32; MimioStudio Notebook software and MimioMobile app.— — — — — —What is the most important difference between generic software product and customized software products?Generic software products are usually a lot less expensive, have many features that cater for all types of users, those features are generally fixed and tie in users to specify methods of working. Features built over time for many types of users and workflows can lead to features losing simplicity. If a software product is missing features, multiple applications may need to be used and these might not integrate with each other. Customised or bespoke software is build specifically around the requirements and workflows of the user and allows for much faster feature enhancement and caters much better for changing user/workflow/business requirements. Features can be built with focus on specific tasks. Integration with other applications or additional features can be created within the same solution. There are pros and cons for both, but the main differences are to do with agility for change, focused user workflows, and the costs involved.I am software developer specialising in bespoke SaaS solutions, with over 20 years software development experience. At the end of the day it's about finding the right tool for the job. What is the most important difference between generic software product and customized software products?— — — — — —What is the best way to search potential channel partners or dealers for software products?For every market, find out who is selling either competing products and poach them, or who is selling complementary products and have them expand their portfolio— — — — — —Is C used widely for making software?A big yes!!!!You can make software using c language.There are lots of software products that are written in c language.Linux?unix ?Winamp media player?? Microsoft excel and the list will go on and on. .and all are written in c language. Is C used widely for making software?Can I make software using C language?— — — — — —Naming software products and tools? [closed]Great idea. But its not really in the interests of the people selling the software. I mean would you buy :the commoditisation of products helps consumers by standardising quality and encouraging competition on price. But as a producer of goods you want people to buy your brand and your product to seem qualitatively different to your competitors.— — — — — —Consumer surplus for software productsConsumer surplus for software products can be calculated differently from other products. Customers tend to buy products with greater consumer surplus. Software companies should know what measure in their market analysis to determine their consumer surplus so that create products that are better at fulfilling their customers. Messerschmitt and Szyperski have studied what factors affect the perceived consumer surplus in the software product market. The value a customer places on software is affected by things such as compatibility with complementary products, degree of adoption in the market, usability, increases in productivity, differentiation from competitors, and innovativeness. These can be customer satisfaction dimensions. On the other hand, many things affect the total cost of ownership of software products besides price. These include implementation, training, management, and operations costs. Additionally, switching costs to competitors play a role because customers may fear that the vendor may discontinue the product or go out of business. These authors suggest that the price of software should be based on its consumer surplus. Pricing strategies can be used to gain the most revenue such as product bundling, forming separable modules, and price discrimination with product variants and target groups. (2004) Calculations of consumer surplus is one way that software firms can keep track of their perception by customers in an integrative way.
I Have a 2000 Ford Explorer with a Coolant Loss.?
I Have a 2000 Ford Explorer with a Coolant Loss.?
I have a 2000 Ford explorer with a coolant loss.?Fill up the system and drive until it's hot, about ten minutes past it reaching operating temperature. Get to a quiet place open the hood and shut the engine off and poke your head around the engine compartment, you will hear the hiss. P.S. I think it's the radiator cap but I do not change things until I am sure.— — — — — —I found 3 kittens in the engine compartment of my car. Will the mother cat be okay without them?have you ever tried knocking on the hood of the motor vehicle to in keeping with probability scare him to popping out the way he have been given in? i've got in no way heard of a cat going up interior a motor vehicle till now. i assumed they have been made so no longer something could desire to get in from below. in keeping with probability he's on the carriage of the motor vehicle particularly below? nicely i am so happy you stumbled on him. in my view, i might in no way have a puppy declawed. there is not any way he can shield himself. or perhaps attempt to climb devoid of claws. undesirable element could desire to particularly be scared to dying. If he wo not pop out to customary voices— — — — — —Is there any reason to (or not to) hose down your car's engine compartment? (under thehood)?There's not a lot of reason to hose down the engine bay on a modern car, unless you just really like the appearance of your engine and like to admire the architecture from time to time. If you are going to do it, try to direct the fiercest spray away from the tenderest electricals, even though they are very well sealed against the weather. Sealed or not, why go looking for trouble, right? And then once you are done, give it a few good hours to dry very thoroughly before you start it up.— — — — — —DRL's Daytime Running Lights, How To Get Rid Of Them?Should be a DRL relay in the box located in the engine compartment. Not a fuse— — — — — —How do I keep my kitten from hiding/sleeping within the engine compartment of my car?I have cats myself and to solve any annoying habit they might have, you must replace it. In your case, your kitten loves heat or warmth so what you have to do is get him a cosy bed of blanket inside and show him where it is. Do not let him outside for a week or two and eventually he will forget about it. If the problem occurs after two weeks of keeping him inside, the best thing to do is to cover up or block his entrance to the car— — — — — —what should i use to degrease engine compartment ?i swear by Simple Green. i use it everywhere, in my shop, in my bathroom, in my kitchen. it's biodegradable, so it's safe when you wash it off outside. one 40 oz. bottle can make 9 gallons of cleaner if you want it diluted, but i use it straight out of the bottle. use it in your washing machine or on your carpet. if you have some heavy grease build-up you will probably have to do some scrubbing, no matter what cleaner you use. plus, it smells good— — — — — —Why is my car squealing?If, as the man says, the brakes have a wear indicator on them, it is designed to scrape harmlessly on the rotors, making noise just before the brakes wear out and start scraping in a bad way. This lets you know, and gives you time to replace the pads inexpensively, instead of waiting until the brake wears down to the metal and ruins the rotors, too. If it were a belt, it would start when you gun the engine, say starting from a light, and would stop when you let off the gas. But a belt does sound more like a squeal, the brake wear indicator more like a scrape. If you open the hood and look inside the engine compartment, WATCH OUT not to let your hair or necklace or sleeves hang down and get caught in the moving belts. It will yank you hankless! Best regards, Mike
Do I Have All That Is Needed I Just Got All My Parts and Want to Know If Im Missing Anything?
Do I Have All That Is Needed I Just Got All My Parts and Want to Know If Im Missing Anything?
do i have all that is needed i just got all my parts and want to know if im missing anything?Thermal compound for the heat sink?— — — — — —Installing CPU With an Attached Heat Sink?Just as other's have said, if you are using ANY force at all, you are probably bending pins. I would make sure that I am holding the weight of the heat sink too. DO NOT just sit it on the socket, hold the weight. Some heat sinks can be very heavy for those little copper pins to hold that kind of weight.Just because you straitened the pins does not mean it will work again. You may have made some of the pins very thin when bending them, and they may break off into the socket when you put it back into the socket. GOOD LUCK.— — — — — —How is the heat generated by a CPU dissipated?Let me add to what David F correctly said. It is important to keep the fins of the heat sink free of dust. The CPU temperature can easily go up from 35C to 50C if full of dust.— — — — — —Is my laptop running too hot?you dont need to reapply the thermal paste you need to clean out the dust off the heat sink and fan— — — — — —Water-Based Heat SinkWater has some great properties for cooling, but it's messy, and awkward to control. So if you are going to incorporate it, make it work.In your present diagram, its high heat capacity means it can absorb a pulse of heat better than a metal heatsink. However, water is a poor conductor of heat, so it's actually insulating the bottom of the heatsink from the top, it's worse than just having a metal heatsink there, if the heat is going to be generated for any length of time. Heat is flowing top to bottom, so natural gravity driven convection is not going to occurWhat it does do well is convection cooling, as it has high heat capacity and low viscosity. If you are going to the bother of using water, then pump it, to flow from a small hot emitter under the TEC hot side, to a large heatsink elsewhere. Heatsink options? A large, finned, radiator, cooled by either natural air convection, or a fan.A large mass of water, large enough that it does not heat up sensibly in your operation time (a bucket, a stream). If you can not flow water to one of these heatsinks, then I would not bother trying to incorporate it into what looks like a basic conduction-path metal heatsink— — — — — —My PC turns-off automatically.What could be the problem?Check your temperature of your cpu using CPU-Z . Your Cpu may not have the heat sink properly installed or enough (or too much) thermal paste. Sounds totally like a heat issue to me. You could have a bad power supply, that would be my other possibility. Software has nothing to do with this.— — — — — —Which heat sink is better for the raspberry pi 3?While it es technically true that copper has a higher thermal conductivity then aluminum that particular heat sink might give it all away with respect to fin efficiency (thicker and shorter fins). It might well be that the difference is negligible in real live. If that is just bad enough (it likely is) different heat sinks do not really matter— — — — — —Why does both GPU and CPU always side by side and has heat sink over them?They are NOT. GPU is on the video card, and CPU is on the mainboard. You are probably mistaking the heatsink/fan on the chipset for the GPU.— — — — — —Is an M.2 heat sink worth it?Generally, no. Bear in mind that NAND flash likes to be hot when written to - i.e., it more easily accepts a 'Program/Erase" cycle, requiring less voltage from the controller; therefore, the controller stays cooler (and performs better) if the NAND cells themselves are allowed to 'heat up" - and that, while higher average temperatures do shorten their long-term retention, you're most likely going to get 6 years out of any 3D NAND being produced today (and you're most likely going to back up that data or transfer it to another drive before that anyway).If, however, you're goal is long-term data retention and you don't require enterprise-level throughput, there may be some benefit to heatsinking a flash drive* (depending on how much surface area the heatsink provides and how much airflow passes over it). Even so, airflow over the NAND is more important than having a heatsink (which, without airflow, will saturate anyway) and most M. (The best I've seen is a mild uptick in performance from keeping the controller a little cooler, but I'd bet you could achieve the same improvement with airflow alone). *Note: Even if you're goal is long-term storage (wherein there would be some benefit to cooling an SSD) there are better methods of archiving than NAND flash - (e.g., magnetic tape, mechanical hard drives, optical media, etc.)Is an M.2 heat sink worth it?
For My Sweet16, Is a Glowinthedarkpool Party Cool? My Pool Has Colored Lights, &ihaveglowlights &stu
For My Sweet16, Is a Glowinthedarkpool Party Cool? My Pool Has Colored Lights, &ihaveglowlights &stu
for my sweet16, is a glowinthedarkpool party cool? my pool has colored lights, &ihaveglowlights &stuff?O my gos yes i would go.. youre lucky— — — — — —Do you like colored lights or just plain white lights.?just change all the others lights or chane yours— — — — — —why commercial airplanes have different colors lights on the wings extremity?Different Color Lights— — — — — —is green color( light pistachio color) good for kitchen..coz i did it on the walls & i want some tips?Yes we painted are Condo kitchen green. More of a pea soup green, I did not think it would look good. But, with darker color acceents, burgandy, and darker cabinets it really looked great— — — — — —colored lights for a party?neon lights— — — — — —i have colored my hair black and would like to color light brown or blonde..what home coloring kit can i use?None. When hair is lightened, it has to be bleached. Especially with black hair. Let a professional do it, or, in a pinch, go to Sally's and ask what you can do— — — — — —The same intensity violet, red, yellow, green, white and blue colored lights fall on to identical yellow surfaces in the same environment. Which of these surfaces will be the warmest after a while?There is not enough information to actually answer this question.The surface warms because it absorbs light. Different colours will be absorbed differently by the surface, and hence heat the surface differently. So far so good. The thing is that 'the surface is yellow" does not actually tell you what you need to know - just what wavelengths of light are absorbed? (Nor does the colour of the light actually tell you what wavelengths are shining on the surface.) This is because colour tells you only a part of the information about the wavelengths of the light.That 'yellow' surface could be yellow because it reflects only yellow light. Or it could be yellow because it refects everything except blue-violet light. Or it could have some other mix of wavelengths it absorbs.Similarly is that yellow light yellow because it is a single wavelength of light with the appropriate wavelength? Or is it a mix of just red and green light, with no yellow present? Presumably those lights all have equal intensity, but even that isn't specified!Let's look a a couple of quick examples. n1) The surface is yellow because it reflects all yellow light and absorbs all other wavelengths. The lights are single wavelengths (monochromatic) except for the white which is continuous over the visible spectrum. All lights have equal power. Then all the colours of light heat equally except for the yellow (which doesn't heat the surface much at all) and the white (which heats the surface much more than the yellow light but less than the single colours because part of the light is reflected. So yellow
How Do I Clean the Engine Compartment of My Maverick?
How Do I Clean the Engine Compartment of My Maverick?
how do i clean the engine compartment of my Maverick?close by self service motor vehicle washing centers each and every now and then have bays dedicated to engine and chassis cleansing. they generally have a severe rigidity wand with warm water recommendations that soften the engine grease even without chemical pre remedies. Be arranged for a no initiate after washing the engine and do not spray the right of the engine.— — — — — —What if we powered our cars with nuclear power in the engine compartment?No. Terrorists would not need to work very hard to blow things up anymore. Electric cars good enough. I did the calculations. If every American drove a Nissan Leaf, that would require 2% more energy than we produce already; approximately two 1 GW nuclear reactors (or whatever power generation system you want). Even plugging into the grid right now would cut CO2 emissions by 60%. The only problem, as always, is the mileage (and exchanging gas stations for level 3 charging stations; charges the battery in a couple minutes). Most people do not drive 100 miles a day though, but it's hard to convince people to let go of those family trips.— — — — — —Strong smell similar to burning food coming from engine compartment?I would replace cabin air filter and go from there— — — — — —What causes an engine to catch fire when over-revving?You see this when the idiot in the video is doing an extended burnout, just spinning the tires in one spot or doing donuts without really going anywhere. This does not normally cause the rods to go through the block unfortunately, but it does causes the exhaust system to get very, very hot, glowing bright red hot. Since there is virtually no airflow through the engine compartment when they are doing this, anything remotely combustible and near the glowing pipes will tend to burst into flames.— — — — — —How to build an engine from scratch help!!!!!!?Hope this helps alot! Things You will Need: * Set of 1/4-inch sockets (metric and standard) * 1/4-inch ratchet * 1/4-inch air gun * 1/4-inch extensions of various lengths * Set of 1/2-inch sockets (metric and standard) * 1/2-inch ratchet * 1/2-inch air gun * 1/2-inch extensions of various lengths * Set of 3/8-inch sockets (metric and standard) * 3/8-inch ratchet * 3/8-inch air gun * 3/8-inch extensions of various lengths * Piston installer * Common screwdriver * Phillips screwdriver * Set of standard wrenches * Set of metric wrenches * Pliers * Water pump pliers * Adjustable wrench * Engine hoist * Engine stand -------------------------------------------------------- INSTRUCTIONS: 1 Soak the new lifters in engine oil for at least five or six hours--but preferably overnight. While the lifters are soaking, line up all the new parts and the nuts and bolts and get all the tools you will need to put the engine together. 2 Install the piston rings on the piston. Make sure you stagger the three rings. If the break in the rings is lined up, you will incur blow-by when the engine is started, and the engine will constantly burn oil. Coat the cylinder walls with STP oil treatment. Though other oils may be used, STP is thick and goopy and sticks to the walls, not only while you are working, but will stay there through start-up, protecting the new engine until the oil pump can properly lubricate everything. 3 Flip the block over and install the top half of main and rod bearings. Coat the visible side of all bearings with STP oil treatment. Lay the crank in place, then put the bottom half of the main bearings on the bearing caps. Install the main bearing caps. This will hold the crank in. Refer to the engine's manual for main bearing spacing and torque values. 4 Flip the block back over. Put the rod bearings in the bearing caps on one of the piston-rod assemblies. Note the markings on top of the piston. This will tell you which way the piston goes into the block. Using a ring compressor, compress the rings into the piston and set the piston into the cylinder hole. Gently tap the piston with a rubber mallet until it fits into the hole. Guide the rod onto the crank journal as you are tapping the piston. Repeat this step for the seven other pistons. 5 Flip the block over. Put the bearings on the bearing caps, coat them with STP oil treatment and install pursuant to the engine's spacing and torque specifications. Install the camshaft. Coat the cam with STP oil treatment, then gently slide the camshaft into the block. Make sure to install the cam button. Install the timing chain and timing cover. Make sure the timing marks are lined up properly before attaching the cover. Install the oil pump and the oil pan. 6 Install the lifters. They should already be coated with oil, as they should have been soaking up to this point. Paint the intake galley. This will help the oil slide back into the block easier. Install the heads. Make sure the head gaskets are in place and they do not cover any of the holes in the water jacket. They only work one way, but may fit on more than one way. Torque the heads down using the specifications for the particular year engine you are working on. 7 Install the pushrods and rocker arms. Refer to the engine's manual for torque specs on the rocker arms. If you are building an overhead cam engine, you will not have pushrods to install. The cam lobe pushes directly on the lifter. Install the intake manifold. You can use a bit of RTV on the gaskets to help hold them in place. 8 Install the valve covers. You are now ready to set the engine into the car. The rest of the accessories (fuel pump, carburetor and distributor or fuel injection) can be installed once the engine is bolted securely into the engine compartment. [PS.Building a car engine from scratch takes time and patience--and you should also have an experienced mechanic to help you with this . Building a car engine entails more than just throwing parts together. Depending on the type of engine, there are different tolerances and torque settings on nuts and bolts that need to be maintained. There are many different types of engines, though the most popular you will run across are 4-cylinder, 6-cylinder and 8-cylinder engines. Engines are further broken down into the type, i.e. carburetor or fuel-injected, single overhead cam, double overhead cam, or conventional cam engines. No matter which engine you have, the major components are all the same.]
MedChain and Trustroot Partner to Secure Electronic Health Record Transactions on the Blockchain
MedChain and Trustroot Partner to Secure Electronic Health Record Transactions on the Blockchain
MedChain and Trustroot Partner to Secure Electronic Health Record Transactions on the BlockchainMedChain, the leading blockchain electronic health record platform is excited to announce a new partnership with the leading blockchain security protocol, Trustroot (www.trustroot.io).This partnership will allow individuals who use the the Medchain's platform to be fully confident in the validity of their transaction. With the high rate of fraudulent activity happening within the blockchain community, the addition of Trustroot's verification will provide customers peace of mind while protecting them from phishing attacks, malware, and other advanced cyber threats. Joachim Sandgaard, CEO of MedChain, said the partnership with Trustroot will give our customers increased confidence in our platform. "Given the importance of an individuals's healthcare record, customer protection is a must, and we are excited to be partnering with Trustroot to keep our customers safe."Commenting on the partnership with MedChain, Shayan Zadeh, CEO of Trustroot, said: "Medchain is a great project that democratizes healthcare records for all patients. We are excited to see our technology providing more users increased safety and security for such a vital technology"MedChain's mission is to use blockchain technology to establish a better, more secure and transparent framework for Electronic Medical Records (EMR) that vastly improves the quality of care for patients while reducing healthcare providers' costs. This allows companies and individuals to build software and applications within a globally compliant framework facilitating secure storage and transparency. Learn more about the project at www.medchain.global.Trustroot is a blockchain protocol that protects individuals and businesses from fraud and theft within the cryptocurrency community. The protocol verifies the identity and trustworthiness of the blockchain business users interact with to help them avoid scams, phishing attacks, and other fraudulent activity. Learn more about the project at www.trustroot.io— — — — — —How Different Industries Including Insurance Can Benefit From Blockchain, AI And IoTDifferent industries, particularly in the insurance sector are just beginning to scratch the surface of how today's three disruptor heavyweights — AI, Internet of Things and blockchain — will transform their organizations and hopefully their services. Current conversations and pilot projects largely center on these technologies individually. But the real disruption is in the intersections between them, and the ways in which they can be used together to bring forth completely new approaches to managing supply chains, data, transactions and more. The potential benefits of solutions that integrate AI, IoT and blockchain are endless. Projects that launch from intersections between these technologies will overcome many of the last mile blockchain problems that have barred adoption to date.Connecting physical assets to the blockchain: Across a number of industries, we are seeing an increasing need to digitally track physical assets. Supply chains are a great example of this. With blockchain technology, different industries can use QR codes or RFID technology to identify units of products. This can be anything from a portion of a food crop, a shipment of chemicals from an oil rig, cosmetics ingredients, auto parts, etc. With a dedicated code or RFID tag, each unit can then be assigned a digital identifier that is traceable on the blockchain. The identifier stays with the item or group of items through the entire lifecycle, with every step of the process recorded on an immutable, secure ledger. For food supply chains, this means the entire history of a produce item — from seed to harvest, to processing, to documentation, to shipment, to the grocery store — can be viewed by simply scanning the code attached to it. Car buying is another use case where the transformative benefits are clear: imagine the transparency that would be introduced into purchasing a used car if a consumer could scan a code attached to that car and see its entire history across manufacture, maintenance, parts replacements, and previous owners.In some industries like insurance, advanced technology or platform is being developed to provide an ecosystem where insurance can be transacted at lightning speed, full clarity, and at much lower costs than ever imagined.Transforming databases for IoT information: In many ways, blockchain can solve the most common challenges faced in managing data today: security, authenticity, access, and scalability. As connected devices continue to drive massive growth in the volume of corporate databases, enterprises are looking for new ways to manage and leverage the data they are storing. Blockchain provides a way for corporations to implement data proof, trust and automation directly at its source — on IoT devices — and then allow that data to become transactive and part of new economies. Health and fitness wearables are one of many examples of how this could take shape in the real world. Feeding data from smartphone apps and wearable devices into a blockchain-based medical records system would allow care providers to view the entire health picture of their patients in a secure way. Then, they could leverage smart contracts on the blockchain to transact with that data, using it to drive down insurance premiums, make payments and incentivize patients to engage in healthy activities.Predictive analytics at scale: It's exciting to consider how AI and predictive analytics can be layered onto blockchain data. In the case of food supply chains and farming, AI could be applied to the extensive store of crop information living on the blockchain, to predict and inform patterns in weather, inventory, shipping delays or anything else that may impact decisions about planting, harvesting and distributing food. Similarly, this type of application could identify buying patterns among consumers and predict what they need for their protection or family especially if they are looking for suitable insurance, helping insurers improve the accuracy of their service and customer satisfaction.Beyond how AI can bolster blockchain, there are benefits blockchain can offer to AI tools as well. Leveraging blockchain data to improve trust and accuracy in AI algorithms and predictions can result in better data models and smarter financial systems. A greater depth of context and information that can be fed into machine learning systems from blockchain stores can ultimately make the tech smarter.The scenarios outlined above point to some of the last mile problems that are hampering wider and faster adoption of blockchain solutions. The more we connect AI, IoT and blockchain, the more seamless our services using this technology will become. By automatically connecting edge devices and systems with blockchain and layering AI on top of those deployments, corporations, and the insurance sector will truly be able to transform every business process from their supply chains, accounting, sales tracking, distribution, compliance, processing claims, and more
5 Year Old Invited to a Birthday Party And...................?
5 Year Old Invited to a Birthday Party And...................?
5 year old invited to a birthday party and...................?tell her if she is grown up enough to start attending parties she should be able to understand her older sister is not going to the party it is a seperate room and event.— — — — — —Wear and hair for a Party?You just want to dress a little nicer than for school but not like you are going to a club, especially since it's in a barn. I would wear colored skinnies with a cute long sleeve top in a contrasting color and a crop jacket for warmth. Then I would wear whatever boots are popular at your school--uggs, ankle booties, cowboy boots, combat boots--or whatever. Add a bangle bracelet to match your skinnies and some medium dangle earrings and you will be cute for the party but not overdressed, which can be awkward. Your hair could be curled and your makeup mostly natural with mascara and a pale peachy lipcolor. Have fun. : — — — — — —Party LightsParty Lights may refer to: "Party Lights" (Claudine Clark song), a 1962 single by Claudine Clark "Party Lights", a 1977 song by Natalie Cole "Party Lights", a song by Bruce Springsteen on his 2015 album The Ties That Bind: The River Collection— — — — — —Boerestaat PartyThe Boerstaat Party (English: Boer State Party) is a right wing South African political party founded on 30 September 1986 by Robert van Tonder. It was never officially registered as a political party because it was unable to rally 500 persons under one roof, a requirement under South African electoral law for official political party status. It was never represented in the South African Parliament, neither in the apartheid era nor after democratisation. In 1989, it joined the Afrikaner Weerstandsbeweging (AWB) in declaring support for Jaap Marais, the leader of the Herstigte Nasionale Party and has worked with the HNP on occasion since. The party was a charter member of the Afrikaner Volksfront coalition group. It has also operated with the paramilitary group, the Boere Weerstandsbeweging (Boer Resistance Movement) led by Andrew Ford. The BSP were the third group in South Africa to openly advocate the restoration of the South African Republic and the Orange Free State and call for the secession of these territories from the Union of South Africa. Other groups advocated this notion in the past, with the Maritz Rebellion of 1914 and the Ossewa Brandwag of the 1940s being the most notable . This policy was later taken on board by the AWB and other rightist movements. The BSP further argued that the Boer citizens of these nineteenth century republics should be considered as a distinct nation from the Afrikaners, known as a Boerestaat. The BSP has been noted for adopting controversial views on AIDS and came out in support of the views on the subject expressed by Thabo Mbeki. The party has also taken an active role in ensuring that the Voortrekker Monument is cared for, with current leader Coen Vermaak a leading advocate in this campaign. Coen Vermaak has become noted for his controversial statements, arguing that it is official policy to drive white people to extinction through the widespread availability of contraceptives whilst he has further argued that 'I am convinced the abortion law is aimed at getting rid of white babies'. Vermaak has also claimed that AIDS was a hoax designed to promote the use of condoms among whites, claiming that 'no Boer [Afrikaner] ever had Aids. It does not exist. It's the biggest scam that can take place'. Whilst the party does not actively call for voting rights to be restricted to whites only, it firmly rejects the post-apartheid doctrine of universal suffrage. For Vermaak, it is ridiculous that a doctor and a vagrant should have an equal say in how the country is governed. He has argued that 'any logical person should understand [that] some people's votes should count more than others'.— — — — — —Party symbols"Thunder Cross" is one of the names for the swastika in Latvian, which was used as a symbol of the organization. The group used a variation of the Roman or Hitler salute, and greeted with the Latvian phrase "Cai sveiks" ("Ready for battle" or "Hail the struggle"). According to Uldis Krsli, although the party used both the swastika and the Roman salute, it was neither affiliated with, nor a copycat of German Nazism- as was the case with the United Latvian National Socialist Party (Latvian: Apvienot Latvijas nacionlsocialistu partija) headed by Jnis telmachers. The uniform of Prkonkrusts was a grey shirt and black beret.
no data

Copyright © 2020 Coffee bag - Guangzhou tianci packaging industry Co,. Ltd. | Sitemap