Do I Have All That Is Needed I Just Got All My Parts and Want to Know If Im Missing Anything?

do i have all that is needed i just got all my parts and want to know if im missing anything?

Do I Have All That Is Needed I Just Got All My Parts and Want to Know If Im Missing Anything? 1

Thermal compound for the heat sink?

— — — — — —

Installing CPU With an Attached Heat Sink?

Just as other's have said, if you are using ANY force at all, you are probably bending pins. I would make sure that I am holding the weight of the heat sink too. DO NOT just sit it on the socket, hold the weight. Some heat sinks can be very heavy for those little copper pins to hold that kind of weight.Just because you straitened the pins does not mean it will work again. You may have made some of the pins very thin when bending them, and they may break off into the socket when you put it back into the socket. GOOD LUCK.

Do I Have All That Is Needed I Just Got All My Parts and Want to Know If Im Missing Anything? 2

— — — — — —

How is the heat generated by a CPU dissipated?

Let me add to what David F correctly said. It is important to keep the fins of the heat sink free of dust. The CPU temperature can easily go up from 35C to 50C if full of dust.

— — — — — —

Is my laptop running too hot?

you dont need to reapply the thermal paste you need to clean out the dust off the heat sink and fan

— — — — — —

Water-Based Heat Sink

Water has some great properties for cooling, but it's messy, and awkward to control. So if you are going to incorporate it, make it work.In your present diagram, its high heat capacity means it can absorb a pulse of heat better than a metal heatsink. However, water is a poor conductor of heat, so it's actually insulating the bottom of the heatsink from the top, it's worse than just having a metal heatsink there, if the heat is going to be generated for any length of time. Heat is flowing top to bottom, so natural gravity driven convection is not going to occurWhat it does do well is convection cooling, as it has high heat capacity and low viscosity. If you are going to the bother of using water, then pump it, to flow from a small hot emitter under the TEC hot side, to a large heatsink elsewhere. Heatsink options? A large, finned, radiator, cooled by either natural air convection, or a fan.A large mass of water, large enough that it does not heat up sensibly in your operation time (a bucket, a stream). If you can not flow water to one of these heatsinks, then I would not bother trying to incorporate it into what looks like a basic conduction-path metal heatsink

— — — — — —

My PC turns-off automatically.What could be the problem?

Check your temperature of your cpu using CPU-Z . Your Cpu may not have the heat sink properly installed or enough (or too much) thermal paste. Sounds totally like a heat issue to me. You could have a bad power supply, that would be my other possibility. Software has nothing to do with this.

— — — — — —

Which heat sink is better for the raspberry pi 3?

While it es technically true that copper has a higher thermal conductivity then aluminum that particular heat sink might give it all away with respect to fin efficiency (thicker and shorter fins). It might well be that the difference is negligible in real live. If that is just bad enough (it likely is) different heat sinks do not really matter

— — — — — —

Why does both GPU and CPU always side by side and has heat sink over them?

They are NOT. GPU is on the video card, and CPU is on the mainboard. You are probably mistaking the heatsink/fan on the chipset for the GPU.

— — — — — —

Is an M.2 heat sink worth it?

Generally, no. Bear in mind that NAND flash likes to be hot when written to - i.e., it more easily accepts a 'Program/Erase" cycle, requiring less voltage from the controller; therefore, the controller stays cooler (and performs better) if the NAND cells themselves are allowed to 'heat up" - and that, while higher average temperatures do shorten their long-term retention, you're most likely going to get 6 years out of any 3D NAND being produced today (and you're most likely going to back up that data or transfer it to another drive before that anyway).If, however, you're goal is long-term data retention and you don't require enterprise-level throughput, there may be some benefit to heatsinking a flash drive* (depending on how much surface area the heatsink provides and how much airflow passes over it). Even so, airflow over the NAND is more important than having a heatsink (which, without airflow, will saturate anyway) and most M. (The best I've seen is a mild uptick in performance from keeping the controller a little cooler, but I'd bet you could achieve the same improvement with airflow alone). *Note: Even if you're goal is long-term storage (wherein there would be some benefit to cooling an SSD) there are better methods of archiving than NAND flash - (e.g., magnetic tape, mechanical hard drives, optical media, etc.)Is an M.2 heat sink worth it?

GET IN TOUCH WITH US
recommended articles
Havn't Spread the Thermal Paste in the Heat Sink ..so Should I Reapply It Now?
Havn't Spread the Thermal Paste in the Heat Sink ..so Should I Reapply It Now?
It does not really matter: different people have different ideas about different ways of applying thermal paste. Some people even think that it's better if you do not spread it, because it spreads more evenly with the pression of the heat sink. The important thing is that it did not overflow from the cpu.1. Solder wont let my heat sink mount flush.?well if you soldered it then probably not2. what is my cpu heat sink?A CPU cooler's bottom surface, often copper, should be perfectly smooth; if the cooler is a used one and the area is scratched or marred, heat transfer in those spots will be imperfect. Do not forget to remove any plastic protective film from the cooler bottom before installing. The bottom of the cooler should touch the top of the CPU, metal to metal (with, of course, thermal paste between them--more on that in Tip 29).3. If I remove a CPU from it's heat sink, do I need to re-apply the thermal compound?It's alway a good practice to clean both the CPU and HSF surfaces and then reapply thermal paste any time that you remove the heat sink. The reason is that if you were to put it back onto the CPU, there would be air trapped between the two surfaces, lowering the heat conductivity between the core and the heat sink. Of course, if it's an old computer or something, feh, just make sure that it does not get dirty.4. What is the heat sink in an internal combustion engine?The heat sink is the environment, at the temperature of the air entering the engine. When you put the heat cycle on paper, you close the cycle between exhaust and admission with a heat exchanger with the environment; the gas enters the heat excahger at the engine exhaust temperature, cools by sinking heat to the environment and exits the heat exchanger at the environment's temperature, where it cycles into the engine again. For air breathing engines at athmospheric pressure there's no need for this heat exchanger since the exchange is done by direct mixing of the exhaust gases into the air outside; it would also make internal combustion impractical, hence it is used in some external combustion engine configurations, in high pressure gas cycles such as Stirling, or in steam cycles, where you cannot mix the working fluid with air at athmospheric pressure.5. PC HEAT SINK QUESTION !! Thermalright Ultra 120 extreme, help !?Check that the clips on both sides are connected. You may have to push with all your weight to get it down far enough to catch6. I need help removing my heat sink for my Emachines T3642?Its the thermal paste, once dried, they can glued to the cpu like a leech, you need to power the machine on for a few seconds to heat it up, then try again. Or gently pull the heatsick off, chances are, the cpu WILL be stuck to the bottom of the sink, so be really careful not to wriggle or move out of position as you could bend the pins , once off, use a blade to scrap it off gently.7. What Heat Sink do you recommend ?? for my desktop?You dont need a heat sink, you need a fan !!! A big ONE !!!8. Would this component require a heat sink?Regulating from 12V to 5V means a voltage drop of 7V in the regulator. At 4mA, the total power dissipation in the regulator is of 0.028W.This is quite low, and the 7805 can handle it without a heatsink.9. What things i'll be required to build a pc of my own by bringing parts one by one?external, 1 case, 2 monitor 3 keyboard 4. mouse. Internal. 5 powersupply 6, motherboard - your motherboard may include on board video, sound, and networking, or, rarely, a built in ssd, 7 CPU, should come with cpu fan and heat sink but if not add them to the list. 8. Ram 9. Hard drive. 10 OS. (11) any of the above listed things not included in the motherboard like a graphics card, sound card, lan, etc.10. Nah. Scrape it off and use it fer makin' party hats.
Would I Have to Reapply More Heat Sink Onto My Processor Fan After Removing It Off of the Processor?
Would I Have to Reapply More Heat Sink Onto My Processor Fan After Removing It Off of the Processor?
Would I have to reapply more heat sink onto my processor fan after removing it off of the processor?Ok first of all the fan that you keep referring to IS the heat sink, the only thing i could think your referring to when you say heat sink is thermal compound. now this depends because some heat sinks already have thermal compound on them, some do not . if it does not then PUT SOME ON. IMO research more about building a computer before you carry on with that build.— — — — — —Can someone please tell me why my computer keeps shutting off !!!!!!???I suspect that the problem is either overheating or a power supply. You state it is not overheating. I suggest you firmly evaluate heating first as follows: Turn the pc off for at least 4 hours, then turn it on and measure the time it takes to shut off. Manually restart it right after shut down and measure the time it takes to shut off. If the time it takes to shut off after initial shut off is very short (e.g. 30 minutes for the first shut down, 1.2 minutes for the second) , I suspect the problem is heat. You must measure the time it takes, do not rely on feelings or suspicion. Make sure you address the heat dissipation issues if you observe the above described behavior. Assuming that the behavior does not suggest heat problem, you must check the power supply in a more rigorous manner. If the 5 v dc side is live, indicator lights go on even if the 12 v dc side of the power supply is intermittant or fails after initial start up. This can be harder to verify and I do not recommend you do this unless you know how to use and have had experience in measuring live voltages with a volt meter. If you know how to do this and have done it before you know how to address this. If you either do not know how or have not done it before, this is not the time to master this skill - get someone else to do it. Being this is a lap top it is a lot harder to troubleshoot than a desk top but these are the steps you should investigate. Finally if it is neither of these, you may well have a problem with the mother board and fixing this is too costly to do.— — — — — —Laptop is REALLY hot on bottom?If it has only recently been getting hot and slow, it may be due to the heatsink separation from the CPU. Clean the dust off of the fan as well, and get software to control the fan speed if it still persists afterwards, and run the fan on higher rpm. EDIT: Do not go with what the other guy said. Hard drives are not what generates the most heat in a pc. It's the cpu that generates the most heat, or a dedicated GPU(is applicable), both of which would be cooled by a combination of heatsink and fan. You should never replace a hard drive unless it has too many bad sectors, clicks or just fails to maintain stored information. Try running it without the battery inserted, make sure that the cpu down clocks when maximum power is not needed. Should be an option for that in BIOS, or use third-party software.— — — — — —Which heat sink is better for the raspberry pi 3?Copper is several times better at shifting heat than aluminium, more than 3X. Always use copper if you have it. I use a small 5V fan and a thermally triggered switch (45°) to dump air on a few small heatsinks in my RPi. The small heatsinks can never remove the heat of the chips adequately without airflow, and are only in place to expand the surface area for passing air. The switch closes the circuit at 53°, and opens again at 35°.: Google 5Pcs KSD9700 5A 250V Degrees Celsius Thermostat Control Temperature Switch R06 . You can pull 5V from near the microUSB jack, use a DMM.— — — — — —I have a Dell Inspiron 15 N5050, Ive had it for about two years if even that long, My warranty is up on it..Its been overheating alot lately?As far as the battery is concerned. batteries do wear out over time and replacement is inevitable. 2-1/2 years on one batery is not too bad, I recommend getting the exact replacement for the battery from the computers manufacturers website, you will know its the right one. As far as the over heating. find a reputable computer shop in your area and have them clean it. Dust has surely found its way into the fan and heat sink preventing the propper amount of cooling (this is not a good situation too much overheating will burn up the processor and ruin the computer). At the shop if they need to they can remove the heat sink and replace the thermal grease to help restore the cooling efficiency if it needs it
What Are Some Ways to Keep My Hair Really Healthy?
What Are Some Ways to Keep My Hair Really Healthy?
Use professional shampoo & conditioner. I know it may seem like a rip-off, however all the shampoos like Pantene, Garnier, etc. have a high alcohol content....since the normal pH of your hair is 4.5-5.5, things containing high amounts of alcohol throw your hair all out of whack and cause breakage, split-ends, fly-aways, etc. The reason these shampoos make your hair feel soft is because they contain high amounts of humectants, which are just a cover for how damaging they really are! Another tip is ALWAYS use a thermal protector while applying heat. Heat appliances cause tons of damage to your hair. Usually this is a cream/clear gel you apply before blow drying. Never use a flat iron on hair that is not completely dry!1. Split End Help. ( 10 Points) !!!!!!!!!!!!!!!!!!!!!!?For sure you should get a trim and maybe even cut your hair as short as you are comfortable doing it. You should for no reason straighten or dye your hair. Look for some Garnier Fructis or Pantene shampoos and conditioner for curly hair so that it extra moisturizes it and helps the split ends repair themselves. I say from experience that ppl with curly hair have really bad split ends, which is why we have special stuff in our hair products. The split ends wont magically go away in like a month or a few weeks, but you will see improvement after a while. Oh, and for sure DO NOT PICK THEM OFF!! It will just make it worse. Every two months until your hair is healthy get a trim. just maybe half an inch or an inch will be just fine. Eventually your hair will go back to normal. Good luck with that!.2. Whats the best shampoo conditioner for cheap?clever or V05 are solid inexpensive ($a million) shampoos, yet whilst it is composed of conditioner i could bypass Tresemme ($6) it does an somewhat solid interest. i take advantage of salon shampoo because of the fact i am form of a hair snob, yet I nonetheless use the cheap conditioner. Pantene is undesirable on your hair (too plenty protein and reasons alot of greater build up on the hair) so i does not bypass there. desire this permits! My hair is oily, superb, and colour-taken care of if that helps you any!3. How can I get my curly hair to be nice like Taylor Swift?Haha i have the same hair long and curly..but not pretty curly! im completely obsessed with taylor and her hair so i did so playing with it and what you really NEED to get is the conair hot sticks!! they are these little flexible curlers and they are not very expensive and i would look like a frizz ball without them!! you can like get them at walmart. anyways what i do when iwear my hair curly is like i get up and get in the shower and wash it and condition it and this may sound weird but dont use a whole lot of conditioner just enough to get it done cause it will help your hair hold the curl the just get out and towel dry your hair till it is just damp and then put a curling mouse in it and frizz serum then finish blow drying it straight! and you know have the curlers on like when your gettin in the shower and then just make sure the little light is on meaning that they are hot enough and then seperate your hair into pretty small peices (if you have really thick hair then you might need to buy two sets cause they only have 14 in them and you use small sections) and then start from the botom of your hair and role it through your hair and pin it together youll see the instructions on how to pin them together and make sure you wrap it all the way to the top of your head and leave them for like 15 or 20 minutes while your finishin gettin ready and then use like a light hairspray about 5 minutes before you take them out then your done. i know this thing was really long but its not that hard lol!!!! hope i helped good luck!!!!!!!!
How Was the First Sale of Vivo X60 Series?
How Was the First Sale of Vivo X60 Series?
Zeiss lens has a history of 175 years. Its biggest advantage is its ultra-clear imaging ability. Generally, only using high-end cameras has become the dream of camera lovers around the world with its unique selling points such as color restoration, high resolution and almost no corner distortion. Why do you talk about dreams here? Because of its ultra-high price, ordinary people can only think but can not become a reality.On December 29, 2020, vivo X60 series, the first product jointly developed by vivo and Zeiss, was officially launched. All the series are equipped with Zeiss optical lenses as standard, which can be owned for a minimum of 3498 yuan. On January 8, vivo X60 series was officially launched. We can see that it won the double champions of JD platform sales sales, tmall platform sales sales, Suning platform sales sales, and also the double champions of online sales and sales. Besides Zeiss blessing, why is vivo X60 series so popular with the market and consumers?Ultra lightweight appearanceThe thickness of vivo X60 does not exceed 8mm, and the weight of vivo X60 does not exceed 180g (excluding the unpublished Super Cup). Among them, the vivo X60 is only 7.36mm thick, making it the lightest 5g mobile phone in the world, 0.04mm thinner than the iPhone 12 series. The slim and fashionable appearance and vivo's strict pursuit of technology and design create the unparalleled hand feel of vivo X60 series. If you don't believe it, you can try it in the offline experience store in person. You can't forget the feeling of holding it in your hand.Top imaging systemThe vivo X60 is equipped with Zeiss optical lens as standard. Whether it is the main camera, ultra wide angle or professional image lens, it is an optical lens jointly developed by both sides. The whole system is equipped with the second generation micro PTZ as standard. With these two hardware blessings and the image system jointly developed by vivo Zeiss, you can take a good picture at any light source and scene. You can learn from the comments of professional photographers on the imaging effect of vivo X60 series.Performance of flagship aircraftVivo X60 is the world's first Samsung Orion 1080 processor. The overall performance of this processor is lower than that of Xiaolong 865. It is much stronger than what MediaTek Tianji 1000 and Xiaolong 765G are used in the same level models. With the blessing of Samsung Orion 1080, vvio X60 is far more competitive than its competitors.
Huami Technology Held a Press Conference on August 27, and Amazfit Smart Sports Watch 3 Officially A
Huami Technology Held a Press Conference on August 27, and Amazfit Smart Sports Watch 3 Officially A
This morning, huami technology officially announced that it would hold the 2019 new product Conference on August 27. Then, Huang Wang, CEO of huami technology, posted the invitation letter for the new product Conference on his microblog. Huami technology distributed amazfit one-way wet guide short sleeved T-shirts and amazfit antelope running shoes to the media as physical invitations. The gift box vacated a watch position, which triggered extensive discussion in the media. Huang Wang also explained that this vacancy was actually reserved for the new amazfit intelligent movement watch 3.(invitation letter from Huang Wang, CEO of huami Technology)The theme of huami technology's 2019 new product launch is "run, amazfit! Run!", which is adapted from the classic line "run, Forrest! Run!" of Forrest Gump. With his pure love for sports, Forrest Gump, the protagonist in the film, runs across the United States. No matter how many difficulties and ridicules he encounters, he also doesn't give up. "Run, Forrest! Run!" is the symbolic line that Forrest Gump's mother encourages him, and Forrest Gump can persevere and succeed step by step. This spirit also inspires many people. According to Huang Wang's microblog, the amazfit smart sports watch 3 not only symbolizes huami technology's understanding and adherence to the sports spirit, but also has a taste of paying tribute to Forrest Gump.(theme poster of huami technology's 2019 new product launch)At present, huami technology has become a leading enterprise in the wearable field. With the power of technology, it promotes everyone in the world to enjoy better sports, health and medical services. Sports is undoubtedly an important part of the mission of huami technology. In the past amazfit smart watch products, we can also see a lot of improvements in sports functions.Taking the amazfit smart watch GTR released last month as an example, it provides 12 sports modes such as outdoor running, walking, outdoor cycling, indoor running, indoor cycling, open water swimming, swimming pool swimming, elliptical machine, mountaineering, cross-country running, skiing and exercise. Turn on the corresponding professional sports mode before sports, you can always understand your sports status and help improve sports efficiency.(huami technology amazfit smart watch GTR)Facing the professional sports market, huami technology has also launched several products of amazfit smart sports watches 1, 2 and 2S. It is worth mentioning that it has been a long time since huami technology last updated the smart sports watch series. With more and more attention to sports and healthy life, huami technology still needs to bring more stimulation to the sports watch market and further implement the mission of huami technology. This may also be an important reason why huami technology updates amazfit smart sports watch 3.In terms of function, at present, amazfit smart sports watch 2 has been equipped with 16 sports modes. According to Xiaobian's guess, amazfit smart sports watch 3 will be richer in sports modes to meet the sports monitoring needs of different users. With more powerful functions, the price of amazfit smart sports watch 3 may reach 2500 yuan, which is also the price level of mainstream sports watches at present. As for whether the new product has more professional sports function improvement, we still need to wait for the official answer on August 27.
Connect to Nonencrypted Wireless Network Using Ubuntu Commands
Connect to Nonencrypted Wireless Network Using Ubuntu Commands
Connect to Nonencrypted Wireless Network Using Ubuntu Commandsthe output from /sbin/iwconfig wlan0 shows you are not associated with any APs.you will need to do /sbin/iwlist wlan0 scan to search for nearby APs, before, and in my experience, sometimes after, you set /sbin/iwconfig wlan0 essid "essid"again, the app wicd is quite nice for managing your wireless, without requiring a lot of extras— — — — — —how to hack into a wireless network?While cracking a wireless security key is somewhat of a grey area legally, using someone elses internet without permission is a crime. But, a google search for WEP cracking might point you in right direction, but no recommended to do so.— — — — — —How to network a house, both wireless and wired.?The best way would be to recreate the wired network, then set up a wireless network. Use a computer to bridge them together— — — — — —Is it possible to extend the range of your wireless network?You have a couple of different options at your disposal. One is getting higher dbi gain antennas for your ROUTER. The second is adding a higher gain dbi antenna to your adapter (optionally, you can do both and really extend the range). Another is getting a range extender. The higher dbi gain antenna plugged into your router and adapter can really extend your network. Without any obstructions, and 15 dbi gain antennas, you can connect at about 2 miles away. The range extender might be a little cheaper. It plugs into an electrical socket and you run an ethernet cable right into it. This is good if you have quite a few walls in between you and router. Not practical if you do not like wires, you would be better off with the antennas. Regards, Brandon— — — — — —Is it a good idea to download something from an unsecured network?If you see that a wireless network says it's "unsecured", this only means that that wireless network does not have a wireless password. Hence, you or anyone can readily connect to it without entering a password. There is minimal risk of you getting a virus just because of connecting to an "unsecured network", except probably if you go to a website or accidentally downloaded an email that has a virus attached to it - things of that sort. Another risk, although very negligible, is that other people who are connected to that same unsecured network may access your computer files given that you have set your computer files to be on SHARED mode. This is HARDLY ever the case, since you will need to grant that person permission via the Windows File Sharing application. So I tell you, it's okay.— — — — — —XBOX 360 WIRELESS NETWORK ADAPTER BYPASS?There are a number of possible solutions here, but they all depend on you having existing hardware that would cost significantly more than the adapter. Firstly, if you have/buy one of the new "slim" xbox 360s, they have wireless built in, so no need for an adapter. Second, if you have a computer connected to the internet near the 360, you can use the laptop as a wireless receiver, then run an ethernet (CAT5) cable from the laptop to your 360. Thirdly, if you have a computer nearby that is connected by a wired connection (cables through the roof etc) then you can use that computer as a router, and plug the xbox into the computer to share connection. If you just have an xbox 360 original in a room that has no wired connection or a computer connected to wireless, your only option is to buy the adapter.— — — — — —Problems with Wireless Network internet connectionWich encryption type do you use? Maybe the router is set to WPA or WPA2 but your PC does only support WEP— — — — — —Setting up a wireless network..?1) Make sure you are on the same Workgroup, ie, both laptop and desktop have same name. 2) Make sure to turn off all software firewalls for setup puroses. 3) Install/enable file/print sharing in Network Connections. 4) Share a folder on each computer, I usually use c:temp, and then map them to each other computer. 5) sometimes you may have to install Netbios/IPX protocol. email/IM me for more help, Good luck!— — — — — —Wireless network card installation problems.?Switch to a USB wireless. Some machines can not handle more than one or two cards, no matter what they can "hold"
Is Time Travel Possible? Can We Travel Back in Time?
Is Time Travel Possible? Can We Travel Back in Time?
There is no actual "correct." Einstein made a "theory," not a fact. If Einstein's theory is correct, we could theoretically travel back in time but the problem is, we would not be able to go into the future1. What's the similarities between time travel and space travel?The faster your motion through space relative to a stationary reference frame, the more your motion is diverted from your motion through time. In other words, in a very specific sense, we move through time at lightspeed. The faster you move through space, the more your movement through time is diverted by your movement through space. At lightspeed, all your motion through time is diverted by your motion through space. A photon does not experience time. All of its motion through time is diverted by its motion through space. According to relativity theory anyway2. How to travel with cats?Some cats do fine being loose in the car. Try taking them for a little ride (5-10 minutes) and see how they react. I had one cat, a wonderful loving tabby, that I took for a car ride. I was not driving, so she crawled into my lap, squalled, and peed all over my lap! Some years later I had 3 Siamese, and drove from Wisconsin to Montana with them loose in the car, without a bit of a problem. I think its great that you are taking your cats along with you!!!3. Is it Cheap to Travel to Trinidad?It all depends on where you are flying from. If you are in the US it might be better for you to go to Miami. For me in the Caribbean, I would definitely go to Trinidad because the fair is cheaper, the prices are not that bad, I know my way around and I would feel safe. I can just go down town and buy a few doubles and just watch the people go buy sitting on the side of the road. You might not want to do that. I might even buy some shark and bake. Generally, I go to Chaguanas and shop but I might just stay in POS. From the time I take to spend that extra money to go to Miami I could stop right here in Trinidad. I have been there many times and I have not have a problem. It is up to you though because my experiences might be different to yours. All you have to do is to stay where there is lots of people and the same precautions you would take in your country take there. Do not walk around with your purse expose because that would be asking for trouble.4. Is it safe to travel to Israel?Of course it's safe. It's safer than the US. all that stuff you hear is media bullS5. Where to travel in Europe?You can visit Norway :)6. How do I learn about mountain bikes?Firstly, size. Also, go and have a look at a few of their bikes, there is an interesting rating system next to the bikes, indicating the type of riding that it is suitable for. Next, using 1 - 10 scale. But this is based upon components, layout and value for money. MBR is a good place to do some research. For general bike buying, it is advisable to stick to some of the bigger brands. Trek, Scott, Giant, Specialized. You might also consider some of the smaller manufacturers like Claude Butler or Dawes. For components use either SRAM or Shimano gears. Cranks, either Shimano or Truvative, although if you want to throw money at this you could easily look at 2 - 300 on Race Face or Hollowtec. However, many manufacturers use their own brand, eg. Bontager = Trek. However, if you stick with the brands listed above, they will use viable kit, it just depends how much money that you want to spend on your bike. Hard tail or full sus? Firstly, do not spend less than 700 on a full sus. Do not buy an all singing, all dancing 200 bike from Walmart, Tesco, Cycleking, etc. Hard tails tend to be lighter. Also, because you are not spending huge amounts on a rear shock, you get better quality components elsewhere. So, spending 700 on a hardtail will get you a nice race machine with good quality components and viable suspension. You will still get a nice full sus for this price, but the overall quality will not be as high. If you are just hitting well maintained gravel tracks and roads, you do not want your front fork to do too much, so 80mm travel is good. This is also good if you want to race, since you lose less forward power to bouncy forks. For general XC, about 100mm fork travel, although an adjustable fork between 80 and 130 mm is OK. Any fork that starts at 120mm travel will tend to fall into the all mountain category. These will have chunkyer tyres than XC and are better for bounlders and logs etc. Downhill will have a lot of travel up front, with a raked back design. Luck
Which Is a Better Design to Put on a Beer Pong Table?
Which Is a Better Design to Put on a Beer Pong Table?
Nah, Dude save yourself time and money. Just purchase some cheap spray paint. Paint DO NOT VOMIT HERE on your table and everywhere else you DO NOT want puke. Your good to go! Good Luck Beer Pong Guy!1. Help me with my BEER PONG TABLE :) 10 POINTS?beerpongtable.com2. What paint and coating do i use for a beer pong Table?Do what I do when I make/paint things, use trail & error. Try out your paints etc.on a waste piece of ply, much more fun to do it all yourself3. Where can i buy an inflatable beer pong table here in the philippines?Inflatable Beer Pong Table4. how do i make a beer pong table?Advice on building Beer Pong Tables Large areas of paint: The best way to do the larger parts of the design is just spray paint with masking tape pressed down to prevent bleeding. Sanding the table down on places where you expect paint edges to be present also cuts down on bleeding. Ours bled a little on most edges, but we just put down white electrical tape on the points where the paint met the wood and it looked fine. If you have the resources, buy/rent a professional-grade low pressure paint spray gun (check out Home Depot or other home improvement stores) and you should not have any bleeding. Lettering For the more intricate parts, we got some heavy, glossy paper meant for LaserJet printers, and cut them out by hand. It was a pain, but it was the best way to do it. You can probably get away with thinner paper. Basically, thinner paper is more likely to let the polyurethane soak through, but it's also less likely to stick out of the poly (you can run your finger over the letters in our first table and feel a tiny ridge). If I were you I would get heavy paper, and then just poly the hell out of it (5 coats, wait 24 hours between each coat). Oh, and get a clearcoat/polyurethane that goes on clear. The white parts on your table (if any) will get a brownish tint otherwise. Graphics For the graphics on our basketball court table (ACC text and the flag) we went to the actual court and just took some digital pictures. With a little help in Photoshop, we were then able to get the graphics the right size and shape (for example, taking a picture of the "ACC" meant that it was kind of like a trapezoid, with the top part of the text not as wide as the bottom, since I took a picture from an angle as opposed to a bird's eye view). Anywho, for those we just went to Kinko's and printed it out on their good computer and color printer. Then we glued it on and polyeurethaned over it. Keep in mind you can always look for graphics online and just print them out (Google has an Image search feature that works well). Sturdy construction We do not have any plans drawn out (well, not on my computer anyway), but it's pretty easy to make a sturdy table. If you've got over $150 allocated for this, do not spare any expense on quality. 3/4" pine plywood is the sturdiest non-expensive board you can get. It will come in an 8'x4' section, but feel free to cut it down (but 8x4 is a nice size). If you've got money to waste, you can even get 3/4" oak. It will look better and is sturdier. You are going to want to build a sturdy frame underneath the table. A complete border of 2x4s should lay underneath the plywood. This not only looks good, but provides most of the anti-warping support. You are also going to want to spend the extra couple of bucks for two more 8' lengths of 2x4s to lay lengthwise along the underneath of the table (so you will have something like four 8-foot 2x4s underneath the table lengthwise, and then two 4-foot lengths at the edge). Legs are pretty easy. We use 4x4's, which is sturdy as hell but does not look great. If you paint them, they might look fine. In any event, a 3/4" plywood with the said frame underneath will never warp, and can even handle a few drunk college boys standing on top of it (not that I would suggest that). Misc Also, get trim for the edge of the table. It's $1/ft. and well worth it. It makes the table look much better, and even stops the occasional ball from rolling off. And to make sure that the table can handle all the beer that will get spilled, use a ton of polyurethane/clearcoat. If you have the time, do over 5 coats (10 is probably the most you will need). Follow the directions on can, but you should most likely not do more than one coat a day (bubbles could form if it does not dry all the way).
What Else to Do on PS3?
What Else to Do on PS3?
What else to do on PS3?Start renting movies. That's mostly what I use mine for these days. Do you want to know what other games you should buy? First I agree with the guy above me about the Assassins' Creed games and Uncharted 2. They are great games. Here is a list of other games you should check out. Buy them used from gamestop because you have 7 days to return them in case you do not like them or just rent them first. Batman Arkham Asylum-best comic book adaption and a must play Marvel Alliance 1 and 2- great to play with friends, up to 4 Red Dead Redemption-must have single player game, has online too but the single player is better The God of War Collection and God of War 3 Castlevania: Lord of Shadows- similar style to God of War Darksiders-similar style to God of War Mass Effect 2-must have single player Dead Space 1 and 2- best sci-fi horror Fear 2: Project Origin-more sci-fi horror Silent Hill Homecoming- eeriest horror Condemned 2- Metal Gear Solid 4-lot's of long cut-scenes but terrific story and gameplay. especially the boss battles Resistance 2 Army of Two: 40th Day-much better online but can play co-op on same screen Borderlands- it is better played online with a friend or 2 Heavenly Sword-short game but stunning production Saints Row 2- looser more over-the-top style of GTA Oblivion-best rpg Brutal Legend-great if you like heavy metal music and lore Transformers War for Cybertron Red Faction Guerrilla- the best destruction engine that allows you to break almost anything Fallout 3-must have single player game Prince of Persia Valkyria Chronicles-amazing game that is often overlooked Far Cry 2-slightly different fps than most with great African setting and good story Heavy Rain-best adult psychological thriller Pure- best atv racing NBA 2k 11-best basketball Fight Night Round 4-much better than 3, and the new Fight Night Champions Just Cause 2-adrenaline rush, open world gameplay Ratchet and Clank: A Crack in Time-best in the series The Sly Collection Civilization Revolution-great strategy Sonic Ultimate Genesis Collection-over 40 classic titles Soulcaliber 4-best 3d fighter The Orange Box- 4 great games in one Yakuza 3- Japanese mob story with fun side challenges— — — — — —Do you play any special floor time games with your baby such as "pattycake or peek-a-boo"? Any other games?I usually crawl behind him and he looks right behind me to see if I am following him and then he goes faster and starts laughing cause he thinks its funny. He also has this activity table where I just take off the legs and while he is sitting down we play with it together— — — — — —Is MGS4 worth getting a Playstation 3 for even if your not interested in other games but a fan of MGS series ?MGS4 is suppose to be the final chapter of Metal gear solid series at least for snake it is. This game was probably the main reason many people decided to get a ps3 just because of this game. This game is a visual masterpiece and the gameplay is aweesomee. This game has everything that a movie has and at the same time you are playing it. It has suspense,action, some humor and overall a fantastic conclusion (in my opinion) to the MGS franchise. This game is honestly a must have for the ps3. The only down side of this game is if you are one of those people who could give a rats *** about the story line and just want to play then you wont get the full experience. Some people say that movie scenes are way to long ,but thats because if you never played the MGS franchise it tries to explain everything and so that it basically breaks down the whole MGS franchise. I played that game twice already and probably going to play it again once i get it back from my friend. To me it was a piece of art and action packed game ,but everyone has the same opinion as i do. So its up to you man— — — — — —Would the video game industry be the same without Mario? What other games has Mario influenced?The video game industry would be VERY different w/o Mario. Mario is an icon in his own name. Super Mario Brothers would not exist.the Nintendo would not have been developed (or have made millions of dollars), arcade games would not be the same, Donkey Kong would need someone else to throw barrels at, Sonic would need someone else to copy (then create his own multi-million dollar franchise).Mario has influenced the game world greatly. .If Mario were gone. .through a VERY VERY VERY VERY VERY long series of gaming relationships.Halo would not exist.NOOOOOOOOOOOOOOO.
How to Protect Data on IOT Devices
How to Protect Data on IOT Devices
Before obtaining internet of things devices or solutions, please first ensure their design security. In some environments, this may not be feasible due to factors such as traditional products, price points, or simply because you don't have enough details on how to protect them.If the provider is unable to provide sufficient information about device security methods, it should reconsider purchasing IOT devices. If the IOT device is already in place, security can be established around it.In addition, it should also ensure that manufacturers of Internet of things devices can provide timely patches and updates for the whole lifeline of the device. After the product entered the market, many security vulnerabilities were found. Since the service life of IOT devices may be as long as 10 to 20 years, their manufacturers should be able to provide you with patches and updates during this period.Here are eight effective ways to protect data on IOT devices.1. Learn about the advantages of connecting to the InternetDon't connect smart devices to the Internet just because they have functions. First, you should check the functions available in your device without connecting it to the Internet. You may find that your smart device has good functions and can be used without the Internet. In this case, it is best to use the device offline. This is a good way to protect your safety without spending any money.2. Use auxiliary networkMost of the time, your WiFi router can create multiple networks to help you create restricted access for family and guests. You should also consider creating an additional network for IOT devices. When accessing a connection through a smart device, this will help you prevent unauthorized access to sensitive data. Having a separate connection to act as a buffer will help ensure that no external entities are allowed to access your shared files and other types of encrypted data.3. Continue to change the passwordIt is important that you constantly change your passwords on your PC, personal accounts, and mobile devices. It should also be remembered that it is equally important to change the password used on IOT devices. Use these passwords carefully and ensure that each device has a unique password. You can use the password manager to remember your password, or even use traditional pen and paper methods. Remember that each password must be changed twice a year.4. Do not enable universal plug and playAlmost all smart devices have a function called UPnP. With this feature, different devices can find each other and connect to each other. This feature makes devices more convenient because you do not need to configure each device separately. However, you need to know that the UPnP protocol uses the local network for connection, so it is easy to be accessed from the outside. In the event of an attack, external entities may be able to access multiple devices at the same time. Therefore, it is best to turn off the UPnP function on each device.5. Update each deviceYou should enable automatic update and there is no automatic update. Please check the firmware update regularly. This is required because it is the way to install a new security patch on the device. As hackers and other intruders continue to come up with new ways to invade IOT devices, technology manufacturers continue to strive to deal with such threats with security measures. Therefore, ensuring that all devices are updated will help to enhance the security of the whole system.6. Reduce the use of cloud technologyAs you know, most IOT providers provide free cloud storage with their devices. The reason is that it is considered an emerging technology. However, this technology has some potential disadvantages. The first is that if you want to access the data stored in the cloud, you need an active connection. Without a connection, you can't access the information. Second, when you access your account, outsiders may invade your connection. So before you start using the cloud, make sure you are familiar with how to protect data security and thoroughly understand privacy measures.7. Pay attention to the storage location of wearable devicesWearable devices use WiFi connections to collect and store personal data so that they can provide you with accurate analysis in the future. Therefore, when you bring a wearable device to a public place, because it is connected to public WiFi, anyone connected to the same network can immediately access your data. Therefore, it is best to avoid wearing wearable devices with shared networks. In case you really want to use it, make sure to disable it when you are not using the device.8. Avoid using risky equipmentSome IOT devices need to be continuously connected to the Internet to operate effectively. Others don't bring much efficiency to your life as you think. Therefore, it is a good habit to evaluate the practicability of the equipment from time to time. If you think they don't help your life, or they seem risky, it's best to discard them. In addition, if only one device can replace multiple other devices, invest in the device. This is because the fewer equipment used, the fewer risk factors.
no data

Copyright © 2020 Coffee bag - Guangzhou tianci packaging industry Co,. Ltd. | Sitemap