Kinver Light Railway

Kinver Light Railway

The Kinver Light Railway operated a passenger and freight tramway service between Amblecote and Kinver, in South Staffordshire, between 1901 and 1930.

— — — — — —

Barasat–Basirhat light railway

The Barasat-Basirhat light railway connecting Barasat and Basirhat in West Bengal in India was opened in 1914. The railway was built in 2 ft 6 in (762 mm) narrow gauge and total length was 69 miles (111 km). The line was later extended to Hasnabad. Due to increasing losses, the railway was closed in 1955. In 1962, the railway was converted to 1,676 mm (5 ft 6 in) and train services were resumed. The route is now part of Kolkata Suburban railway.

— — — — — —

Almond Valley Light Railway

The Almond Valley Light Railway is a 2 ft 6 in (762 mm) narrow gauge heritage railway running at the Almond Valley Heritage Trust site at Livingston, Scotland. The railway operates at weekends between Easter and the end of September and daily during some school holiday periods. There are two stations, both with waiting shelters and run round loops. A small two-road loco shed is provided at the heritage centre end of the line. There is a storage siding here also

— — — — — —

The Dehri Rohtas Light Railway (2'6") running shed

Here it was a completely different story. The railway closed on 16 July 1984 and since then nothing has moved. In the shed there were seven ZB class and three tank engines, one being Kalka Simla Railway. All were seen totally rusted through and shot to pieces with trees and vegetation running riot on, through and around them. They are still locked up and guarded and inaccessible without permission though. - All locos were seen in poor or derelict condition - No.7-9, 11-13 and No.15 were brought new by DRLR. - No.24 is ex. Kalka Simla Railway, Northern Railway No.529 - RI 1 is ex Dwara - Therria Light Railway - Most of the above locos still had their work plates intact - The ZBs had raised brass numerals on the cabside and raised brass DRLR lettering on some of the tenders

— — — — — —

Development of narrow-gauge concepts and the Barsi Light Railway

During his time in India Calthrop developed his ideas on the construction of narrow-gauge railways. He surmised that the axle load on the axles of all rolling stock, including locomotives, could be equal, allowing a maximum loading of goods wagons. He settled on a loading of 5 long tons (5.1 t; 5.6 short tons) per axle, which was light enough to allow railway lines to be built with 30 pounds per yard (14.9 kilograms per metre) rail. It also allowed the loading of one 20 long tons (20.3 t; 22.4 short tons) capacity 4-wheel standard-gauge wagon to be carried on a single bogie narrow-gauge wagon. Further, he argued that using a track gauge of 2 ft 6 in (762 mm) gave the greatest capacity as a percentage of capital cost. He estimated a 2 ft 6 in (762 mm) gauge railway could be built to four times the length of a standard-gauge railway for the same capital cost. Calthrop had been engaged in negotiations with the Indian government for concessions to build a railway from Barsi Road to Barsi since 1887. In 1895, negotiations reached a satisfactory conclusion, and Calthrop formed a new company to build the Barsi Light Railway, and employed himself as consulting engineer. The railway became a showcase for his ideas. Five 0-8-4T locomotives, with even distribution of axle load, were constructed to Calthrop's specification by Kitson & Co. The goods rolling stock was constructed on common 25 by 7 feet (7.6 m × 2.1 m) pressed steel underframes, reducing tare weight and maximising potential wagon loads. Calthrop recognised the importance of railways in warfare, and designed the rolling stock to facilitate the movement of troops and equipment. Rolling stock rode on pressed-steel Fox bogies, using the Timmis system of double coiled springs. The line was constructed with rail inclination, then a new idea, which involves tilting the rail a few degrees to make its surface more nearly parallel with that of the tyre. Inclination is now applied universally to railways. The rolling stock could accept 100-foot (30.48 m) radius curves. The line was opened for inspection by railway officials and journalists, and a number of reports were published in the technical railway press. The Barsi Light Railway opened in 1897, and was extended on a number of occasions until it reached a total length of 202 miles (325 km) in 1927. The example of the Barsi Light Railway is regarded as having revolutionised the narrow-gauge railway system of Indian subcontinent, and the railway was immensely successful, establishing Calthrop as one of the leading figures in the field. Calthrop remained consulting engineer until he retired due to ill health two years prior to his death. The Barsi Light Railway continued to be operated as a privately owned railway until 1954 when it was purchased by the Indian government, and continued to operate as a narrow-gauge railway until conversion to broad gauge began in the late 1990s as part of Indian Railways conversion program for all metre- and narrow-gauge lines.

GET IN TOUCH WITH US
Articles recommandés
Headcorn and Maidstone Junction Light Railway
Headcorn and Maidstone Junction Light Railway
Coordinates: 511008N 03712E / 51.169N 0.620E / 51.169; 0.620 . The Headcorn & Maidstone Junction Light Railway was a proposed railway in Kent. An Act of Parliament authorised its construction, but only a short branch at Tovil, opened to goods only, was built.• Other Related Knowledge ofthe light railway— — — — — —Parlakimedi Light RailwayParlakimedi Light Railway (PLR) was a narrow gauge railway line between Naupada and Gunupur in states of Orissa and Andhra Pradesh.— — — — — —Froissy Dompierre Light RailwayCoordinates: 49°55′24″N 2°43′45″E / 49.92333°N 2.72917°E / 49.92333; 2.72917 The Froissy Dompierre Light Railway (CFCD) is a 600 mm (1 ft 11 5⁄8 in) narrow gauge light railway running from Froissy (a hamlet of La Neuville-lès-Bray) to Dompierre-Becquincourt, through Cappy, in the Somme department, France. It is the last survivor of the 600 mm (1 ft 11 5⁄8 in) narrow gauge trench railways of the World War I battlefields.— — — — — —Derwent Valley Light RailwayThe Derwent Valley Light Railway (DVLR) (also known as The Blackberry Line) was a privately owned standard-gauge railway in North Yorkshire, England, and was unusual in that it was never nationalised, remaining as a private operation all its life. It ran between Layerthorpe on the outskirts of York to Cliffe Common near Selby. It opened in two stages, in 1912 and 1913, and closed in sections between 1965 and 1981. Between 1977 and 1979, passenger steam trains operated between Layerthorpe and Dunnington - the entire length of track at that time. In 1993 a small section was re-opened as part of the Yorkshire Museum of Farming at Murton. The line gained its nickname of The Blackberry Line in the days when it used to transport blackberries to markets in Yorkshire and London.— — — — — —Ashover Light RailwayThe Ashover Light Railway was a 1 ft 11 1⁄2 in (597 mm) narrow gauge railway in Derbyshire, England that connected Clay Cross and Ashover. It was built by the Clay Cross Company to transport minerals such as limestone, fluorite, barytes and gritstone to its works at Clay Cross and for transport around the country by the LMS— — — — — —Highclere, Kingsclere and Basingstoke Light RailwayThe Highclere, Kingsclere and Basingstoke Light Railway was a proposed light railway in Hampshire, England, connecting the Didcot, Newbury and Southampton Railway (DNSR) with the London and South Western Railway (LSWR). Despite public support of the railway proposal, sufficient funding was never obtained and the proposals were abandoned— — — — — —Howrah–Amta light railwayThe Howrah-Amta light railway had its origin in an agreement, dated 12 June 1889 between the District Board of Howrah and Messrs. Walsh, Lovett & Co., which was subsequently renewed with Messrs. Martin & Co., and sanctioned by Government notification in the Calcutta Gazette of 27 March 1895. This was one of the Martin lines which was on 2'0" gauge instead of the more common 2'6". The railway connecting Howrah and Amta in West Bengal was opened up to Domjur in 1897, and to Amta in 1898. An extension from Bargachhia (Bargechhe) Junction to Autpur was opened in 1904, and a further extension to Champadanga in 1908. The total length of the railway was 42 miles (68 km). Both the Howrah- Amta and Howrah-Sheakhala lines used to start from Telkalghat on the Hooghly river, running to Kadamtala station. Here they separate, the Howrah-Sheakhala line running north-west along the Benares road to Sheakhala in Hooghly district. The Howrah-Amta line runs west, chiefly along the side of the Jagatballabhpur road, and then goes south-west to Amta. At various times of the narrow gauge operations, the passenger trains started from different places. In the 1943 Indian Bradshaw they were shown as running from Kadamtala. The management decided to close the line from 1 January 1973 and in view of the growing demand of local people for a railway service, the Indian Railways agreed to construct a broad-gauge-way from Amta to Champadanga. The railway was converted to 1,676 mm (5 ft 6 in) broad gauge in phase starting from 1984 and completing in 2000. Only the Howrah-Amta section was rebuilt, while the line from Bargachia to Champadanga does not exist now. There was some construction of a new alignment from Howrah station which utilized the existing route up to Santragachhi Junction and skipped some of the older stations up to Makardaha, while new stations came up on this alignment at Bankaranayabaz, Baltikuri, Kona, Dansi and Jhaluarber. While some stations from the old line have been retained, some stations on the rebuilt line are at new locations. The route is now part of Kolkata Suburban Railway. It has been electrified and EMU local trains run between Howrah and Amta. This route now comes under the jurisdiction of the South Eastern Railway.
South Downs Light Railway
South Downs Light Railway
South Downs Light RailwayThe South Downs Light Railway is a 10 14 in (260 mm) gauge railway at Pulborough in West Sussex, England. The line opened in 2000 (after adjusting the gauge to 10 1/4 from 7 1/4 as there was a line there before the South Downs Light Railway arrived, and operates around the grounds of Pulborough Wyevale Garden Centre, but now it is operating under British Garden Centres. On a regular day one of their two Exmoor Steam Locomotives will be in-charge of the service. Their two Exmoor's are named 'Pulborough' and 'Peggy'. The railway hosts a range of scale locomotive which includes an LNER Flying Scotsman and others. The railway has their own engine shed which has a workshop at the back of it. Just outside the engine shed there is a traverser to move the engine. There is also a drop-down pit so the engines can be inspected underneath. The old engine shed has now been converted to the railway's carriage shed. The railway has two stations, Stopham Road Station (where most people will start their journey) and Hardham Halt which is used during gala days and during Christmas as the North Pole. 2020 is the railway's 20th year of operating in its current location and they are hosting a 20th Gala Weekend which will most likely host visiting engines plus special attractions that are yet to be announced by the railway. The railway have announced that this gala weekend will happen in August. The railway has developed a lot since they first opened including a new expansion, new engine shed, new workshop plus a new station (Hardham Halt).— — — — — —East Kent Light Railway. The East Kent Light Railway was part of the Colonel Stephens group of cheaply built rural light railways in England. Holman Fred Stephens was engineer from its inception, subsequently becoming director and manager. The line ran from Shepherdswell to Wingham (Canterbury Road) Station with a branch from Eastry through Poison Cross to Richborough Port. Built primarily to serve colliery traffic, the line was built with many spurs and branches to serve the mostly unsuccessful mines of the Kent coalfield, with cancelled plans to construct several others. The success of Tilmanstone colliery allowed the main line of the railway to continue operation until 1986, when the remainder of the line became a heritage railway.— — — — — —The Dehri Rohtas Light Railway (2'6") running shedHere it was a completely different story. The railway closed on 16 July 1984 and since then nothing has moved. In the shed there were seven ZB class and three tank engines, one being Kalka Simla Railway. All were seen totally rusted through and shot to pieces with trees and vegetation running riot on, through and around them. They are still locked up and guarded and inaccessible without permission though. - All locos were seen in poor or derelict condition - No.7-9, 11-13 and No.15 were brought new by DRLR. - No.24 is ex. Kalka Simla Railway, Northern Railway No.529 - RI 1 is ex Dwara - Therria Light Railway - Most of the above locos still had their work plates intact - The ZBs had raised brass numerals on the cabside and raised brass DRLR lettering on some of the tenders— — — — — —Headcorn and Maidstone Junction Light RailwayCoordinates: 511008N 03712E / 51.169N 0.620E / 51.169; 0.620 . The Headcorn & Maidstone Junction Light Railway was a proposed railway in Kent. An Act of Parliament authorised its construction, but only a short branch at Tovil, opened to goods only, was built.— — — — — —Cleobury Mortimer and Ditton Priors Light RailwayThe Cleobury Mortimer and Ditton Priors Light Railway was authorised under a Light Railway Order on 23 March 1901. It was to build a line from a junction with the Tenbury and Bewdley Railway at Cleobury Mortimer. After considerable delay the line was opened to goods traffic on 19 July 1908, passenger trains following on 21 November 1908. For some years the Cleobury Mortimer and Ditton Priors Railway was simply a rural branch line; its passenger service ceased in 1938. The increasing international tension following the Munich crisis of 1938 resulted, among other things, in a search for sites for the storage of naval ordnance. A site at Ditton Priors was considered to be suitable, and preparations were made to construct what became the Royal Naval Armaments Depot, Ditton Priors. It opened in 1940, and the majority of the traffic moved by rail. The site eventually extended over a very considerable area, and the development brought much goods traffic to the CM&DPR and also the Tenbury and Bewdley line. At the end of World War II the depot was used for decommissioned armaments. In 1955 the branch line was transferred to the ownership of the Ministry of Defence (Admiralty) for 40,000. In 1960 the railway line was finally closed but the Royal Navy continued to use the depot as a non-rail-connected base until 1965.
What Are Some Ways to Keep My Hair Really Healthy?
What Are Some Ways to Keep My Hair Really Healthy?
Use professional shampoo & conditioner. I know it may seem like a rip-off, however all the shampoos like Pantene, Garnier, etc. have a high alcohol content....since the normal pH of your hair is 4.5-5.5, things containing high amounts of alcohol throw your hair all out of whack and cause breakage, split-ends, fly-aways, etc. The reason these shampoos make your hair feel soft is because they contain high amounts of humectants, which are just a cover for how damaging they really are! Another tip is ALWAYS use a thermal protector while applying heat. Heat appliances cause tons of damage to your hair. Usually this is a cream/clear gel you apply before blow drying. Never use a flat iron on hair that is not completely dry!1. Split End Help. ( 10 Points) !!!!!!!!!!!!!!!!!!!!!!?For sure you should get a trim and maybe even cut your hair as short as you are comfortable doing it. You should for no reason straighten or dye your hair. Look for some Garnier Fructis or Pantene shampoos and conditioner for curly hair so that it extra moisturizes it and helps the split ends repair themselves. I say from experience that ppl with curly hair have really bad split ends, which is why we have special stuff in our hair products. The split ends wont magically go away in like a month or a few weeks, but you will see improvement after a while. Oh, and for sure DO NOT PICK THEM OFF!! It will just make it worse. Every two months until your hair is healthy get a trim. just maybe half an inch or an inch will be just fine. Eventually your hair will go back to normal. Good luck with that!.2. Whats the best shampoo conditioner for cheap?clever or V05 are solid inexpensive ($a million) shampoos, yet whilst it is composed of conditioner i could bypass Tresemme ($6) it does an somewhat solid interest. i take advantage of salon shampoo because of the fact i am form of a hair snob, yet I nonetheless use the cheap conditioner. Pantene is undesirable on your hair (too plenty protein and reasons alot of greater build up on the hair) so i does not bypass there. desire this permits! My hair is oily, superb, and colour-taken care of if that helps you any!3. How can I get my curly hair to be nice like Taylor Swift?Haha i have the same hair long and curly..but not pretty curly! im completely obsessed with taylor and her hair so i did so playing with it and what you really NEED to get is the conair hot sticks!! they are these little flexible curlers and they are not very expensive and i would look like a frizz ball without them!! you can like get them at walmart. anyways what i do when iwear my hair curly is like i get up and get in the shower and wash it and condition it and this may sound weird but dont use a whole lot of conditioner just enough to get it done cause it will help your hair hold the curl the just get out and towel dry your hair till it is just damp and then put a curling mouse in it and frizz serum then finish blow drying it straight! and you know have the curlers on like when your gettin in the shower and then just make sure the little light is on meaning that they are hot enough and then seperate your hair into pretty small peices (if you have really thick hair then you might need to buy two sets cause they only have 14 in them and you use small sections) and then start from the botom of your hair and role it through your hair and pin it together youll see the instructions on how to pin them together and make sure you wrap it all the way to the top of your head and leave them for like 15 or 20 minutes while your finishin gettin ready and then use like a light hairspray about 5 minutes before you take them out then your done. i know this thing was really long but its not that hard lol!!!! hope i helped good luck!!!!!!!!
How Was the First Sale of Vivo X60 Series?
How Was the First Sale of Vivo X60 Series?
Zeiss lens has a history of 175 years. Its biggest advantage is its ultra-clear imaging ability. Generally, only using high-end cameras has become the dream of camera lovers around the world with its unique selling points such as color restoration, high resolution and almost no corner distortion. Why do you talk about dreams here? Because of its ultra-high price, ordinary people can only think but can not become a reality.On December 29, 2020, vivo X60 series, the first product jointly developed by vivo and Zeiss, was officially launched. All the series are equipped with Zeiss optical lenses as standard, which can be owned for a minimum of 3498 yuan. On January 8, vivo X60 series was officially launched. We can see that it won the double champions of JD platform sales sales, tmall platform sales sales, Suning platform sales sales, and also the double champions of online sales and sales. Besides Zeiss blessing, why is vivo X60 series so popular with the market and consumers?Ultra lightweight appearanceThe thickness of vivo X60 does not exceed 8mm, and the weight of vivo X60 does not exceed 180g (excluding the unpublished Super Cup). Among them, the vivo X60 is only 7.36mm thick, making it the lightest 5g mobile phone in the world, 0.04mm thinner than the iPhone 12 series. The slim and fashionable appearance and vivo's strict pursuit of technology and design create the unparalleled hand feel of vivo X60 series. If you don't believe it, you can try it in the offline experience store in person. You can't forget the feeling of holding it in your hand.Top imaging systemThe vivo X60 is equipped with Zeiss optical lens as standard. Whether it is the main camera, ultra wide angle or professional image lens, it is an optical lens jointly developed by both sides. The whole system is equipped with the second generation micro PTZ as standard. With these two hardware blessings and the image system jointly developed by vivo Zeiss, you can take a good picture at any light source and scene. You can learn from the comments of professional photographers on the imaging effect of vivo X60 series.Performance of flagship aircraftVivo X60 is the world's first Samsung Orion 1080 processor. The overall performance of this processor is lower than that of Xiaolong 865. It is much stronger than what MediaTek Tianji 1000 and Xiaolong 765G are used in the same level models. With the blessing of Samsung Orion 1080, vvio X60 is far more competitive than its competitors.
Huami Technology Held a Press Conference on August 27, and Amazfit Smart Sports Watch 3 Officially A
Huami Technology Held a Press Conference on August 27, and Amazfit Smart Sports Watch 3 Officially A
This morning, huami technology officially announced that it would hold the 2019 new product Conference on August 27. Then, Huang Wang, CEO of huami technology, posted the invitation letter for the new product Conference on his microblog. Huami technology distributed amazfit one-way wet guide short sleeved T-shirts and amazfit antelope running shoes to the media as physical invitations. The gift box vacated a watch position, which triggered extensive discussion in the media. Huang Wang also explained that this vacancy was actually reserved for the new amazfit intelligent movement watch 3.(invitation letter from Huang Wang, CEO of huami Technology)The theme of huami technology's 2019 new product launch is "run, amazfit! Run!", which is adapted from the classic line "run, Forrest! Run!" of Forrest Gump. With his pure love for sports, Forrest Gump, the protagonist in the film, runs across the United States. No matter how many difficulties and ridicules he encounters, he also doesn't give up. "Run, Forrest! Run!" is the symbolic line that Forrest Gump's mother encourages him, and Forrest Gump can persevere and succeed step by step. This spirit also inspires many people. According to Huang Wang's microblog, the amazfit smart sports watch 3 not only symbolizes huami technology's understanding and adherence to the sports spirit, but also has a taste of paying tribute to Forrest Gump.(theme poster of huami technology's 2019 new product launch)At present, huami technology has become a leading enterprise in the wearable field. With the power of technology, it promotes everyone in the world to enjoy better sports, health and medical services. Sports is undoubtedly an important part of the mission of huami technology. In the past amazfit smart watch products, we can also see a lot of improvements in sports functions.Taking the amazfit smart watch GTR released last month as an example, it provides 12 sports modes such as outdoor running, walking, outdoor cycling, indoor running, indoor cycling, open water swimming, swimming pool swimming, elliptical machine, mountaineering, cross-country running, skiing and exercise. Turn on the corresponding professional sports mode before sports, you can always understand your sports status and help improve sports efficiency.(huami technology amazfit smart watch GTR)Facing the professional sports market, huami technology has also launched several products of amazfit smart sports watches 1, 2 and 2S. It is worth mentioning that it has been a long time since huami technology last updated the smart sports watch series. With more and more attention to sports and healthy life, huami technology still needs to bring more stimulation to the sports watch market and further implement the mission of huami technology. This may also be an important reason why huami technology updates amazfit smart sports watch 3.In terms of function, at present, amazfit smart sports watch 2 has been equipped with 16 sports modes. According to Xiaobian's guess, amazfit smart sports watch 3 will be richer in sports modes to meet the sports monitoring needs of different users. With more powerful functions, the price of amazfit smart sports watch 3 may reach 2500 yuan, which is also the price level of mainstream sports watches at present. As for whether the new product has more professional sports function improvement, we still need to wait for the official answer on August 27.
Connect to Nonencrypted Wireless Network Using Ubuntu Commands
Connect to Nonencrypted Wireless Network Using Ubuntu Commands
Connect to Nonencrypted Wireless Network Using Ubuntu Commandsthe output from /sbin/iwconfig wlan0 shows you are not associated with any APs.you will need to do /sbin/iwlist wlan0 scan to search for nearby APs, before, and in my experience, sometimes after, you set /sbin/iwconfig wlan0 essid "essid"again, the app wicd is quite nice for managing your wireless, without requiring a lot of extras— — — — — —how to hack into a wireless network?While cracking a wireless security key is somewhat of a grey area legally, using someone elses internet without permission is a crime. But, a google search for WEP cracking might point you in right direction, but no recommended to do so.— — — — — —How to network a house, both wireless and wired.?The best way would be to recreate the wired network, then set up a wireless network. Use a computer to bridge them together— — — — — —Is it possible to extend the range of your wireless network?You have a couple of different options at your disposal. One is getting higher dbi gain antennas for your ROUTER. The second is adding a higher gain dbi antenna to your adapter (optionally, you can do both and really extend the range). Another is getting a range extender. The higher dbi gain antenna plugged into your router and adapter can really extend your network. Without any obstructions, and 15 dbi gain antennas, you can connect at about 2 miles away. The range extender might be a little cheaper. It plugs into an electrical socket and you run an ethernet cable right into it. This is good if you have quite a few walls in between you and router. Not practical if you do not like wires, you would be better off with the antennas. Regards, Brandon— — — — — —Is it a good idea to download something from an unsecured network?If you see that a wireless network says it's "unsecured", this only means that that wireless network does not have a wireless password. Hence, you or anyone can readily connect to it without entering a password. There is minimal risk of you getting a virus just because of connecting to an "unsecured network", except probably if you go to a website or accidentally downloaded an email that has a virus attached to it - things of that sort. Another risk, although very negligible, is that other people who are connected to that same unsecured network may access your computer files given that you have set your computer files to be on SHARED mode. This is HARDLY ever the case, since you will need to grant that person permission via the Windows File Sharing application. So I tell you, it's okay.— — — — — —XBOX 360 WIRELESS NETWORK ADAPTER BYPASS?There are a number of possible solutions here, but they all depend on you having existing hardware that would cost significantly more than the adapter. Firstly, if you have/buy one of the new "slim" xbox 360s, they have wireless built in, so no need for an adapter. Second, if you have a computer connected to the internet near the 360, you can use the laptop as a wireless receiver, then run an ethernet (CAT5) cable from the laptop to your 360. Thirdly, if you have a computer nearby that is connected by a wired connection (cables through the roof etc) then you can use that computer as a router, and plug the xbox into the computer to share connection. If you just have an xbox 360 original in a room that has no wired connection or a computer connected to wireless, your only option is to buy the adapter.— — — — — —Problems with Wireless Network internet connectionWich encryption type do you use? Maybe the router is set to WPA or WPA2 but your PC does only support WEP— — — — — —Setting up a wireless network..?1) Make sure you are on the same Workgroup, ie, both laptop and desktop have same name. 2) Make sure to turn off all software firewalls for setup puroses. 3) Install/enable file/print sharing in Network Connections. 4) Share a folder on each computer, I usually use c:temp, and then map them to each other computer. 5) sometimes you may have to install Netbios/IPX protocol. email/IM me for more help, Good luck!— — — — — —Wireless network card installation problems.?Switch to a USB wireless. Some machines can not handle more than one or two cards, no matter what they can "hold"
Is Time Travel Possible? Can We Travel Back in Time?
Is Time Travel Possible? Can We Travel Back in Time?
There is no actual "correct." Einstein made a "theory," not a fact. If Einstein's theory is correct, we could theoretically travel back in time but the problem is, we would not be able to go into the future1. What's the similarities between time travel and space travel?The faster your motion through space relative to a stationary reference frame, the more your motion is diverted from your motion through time. In other words, in a very specific sense, we move through time at lightspeed. The faster you move through space, the more your movement through time is diverted by your movement through space. At lightspeed, all your motion through time is diverted by your motion through space. A photon does not experience time. All of its motion through time is diverted by its motion through space. According to relativity theory anyway2. How to travel with cats?Some cats do fine being loose in the car. Try taking them for a little ride (5-10 minutes) and see how they react. I had one cat, a wonderful loving tabby, that I took for a car ride. I was not driving, so she crawled into my lap, squalled, and peed all over my lap! Some years later I had 3 Siamese, and drove from Wisconsin to Montana with them loose in the car, without a bit of a problem. I think its great that you are taking your cats along with you!!!3. Is it Cheap to Travel to Trinidad?It all depends on where you are flying from. If you are in the US it might be better for you to go to Miami. For me in the Caribbean, I would definitely go to Trinidad because the fair is cheaper, the prices are not that bad, I know my way around and I would feel safe. I can just go down town and buy a few doubles and just watch the people go buy sitting on the side of the road. You might not want to do that. I might even buy some shark and bake. Generally, I go to Chaguanas and shop but I might just stay in POS. From the time I take to spend that extra money to go to Miami I could stop right here in Trinidad. I have been there many times and I have not have a problem. It is up to you though because my experiences might be different to yours. All you have to do is to stay where there is lots of people and the same precautions you would take in your country take there. Do not walk around with your purse expose because that would be asking for trouble.4. Is it safe to travel to Israel?Of course it's safe. It's safer than the US. all that stuff you hear is media bullS5. Where to travel in Europe?You can visit Norway :)6. How do I learn about mountain bikes?Firstly, size. Also, go and have a look at a few of their bikes, there is an interesting rating system next to the bikes, indicating the type of riding that it is suitable for. Next, using 1 - 10 scale. But this is based upon components, layout and value for money. MBR is a good place to do some research. For general bike buying, it is advisable to stick to some of the bigger brands. Trek, Scott, Giant, Specialized. You might also consider some of the smaller manufacturers like Claude Butler or Dawes. For components use either SRAM or Shimano gears. Cranks, either Shimano or Truvative, although if you want to throw money at this you could easily look at 2 - 300 on Race Face or Hollowtec. However, many manufacturers use their own brand, eg. Bontager = Trek. However, if you stick with the brands listed above, they will use viable kit, it just depends how much money that you want to spend on your bike. Hard tail or full sus? Firstly, do not spend less than 700 on a full sus. Do not buy an all singing, all dancing 200 bike from Walmart, Tesco, Cycleking, etc. Hard tails tend to be lighter. Also, because you are not spending huge amounts on a rear shock, you get better quality components elsewhere. So, spending 700 on a hardtail will get you a nice race machine with good quality components and viable suspension. You will still get a nice full sus for this price, but the overall quality will not be as high. If you are just hitting well maintained gravel tracks and roads, you do not want your front fork to do too much, so 80mm travel is good. This is also good if you want to race, since you lose less forward power to bouncy forks. For general XC, about 100mm fork travel, although an adjustable fork between 80 and 130 mm is OK. Any fork that starts at 120mm travel will tend to fall into the all mountain category. These will have chunkyer tyres than XC and are better for bounlders and logs etc. Downhill will have a lot of travel up front, with a raked back design. Luck
Which Is a Better Design to Put on a Beer Pong Table?
Which Is a Better Design to Put on a Beer Pong Table?
Nah, Dude save yourself time and money. Just purchase some cheap spray paint. Paint DO NOT VOMIT HERE on your table and everywhere else you DO NOT want puke. Your good to go! Good Luck Beer Pong Guy!1. Help me with my BEER PONG TABLE :) 10 POINTS?beerpongtable.com2. What paint and coating do i use for a beer pong Table?Do what I do when I make/paint things, use trail & error. Try out your paints etc.on a waste piece of ply, much more fun to do it all yourself3. Where can i buy an inflatable beer pong table here in the philippines?Inflatable Beer Pong Table4. how do i make a beer pong table?Advice on building Beer Pong Tables Large areas of paint: The best way to do the larger parts of the design is just spray paint with masking tape pressed down to prevent bleeding. Sanding the table down on places where you expect paint edges to be present also cuts down on bleeding. Ours bled a little on most edges, but we just put down white electrical tape on the points where the paint met the wood and it looked fine. If you have the resources, buy/rent a professional-grade low pressure paint spray gun (check out Home Depot or other home improvement stores) and you should not have any bleeding. Lettering For the more intricate parts, we got some heavy, glossy paper meant for LaserJet printers, and cut them out by hand. It was a pain, but it was the best way to do it. You can probably get away with thinner paper. Basically, thinner paper is more likely to let the polyurethane soak through, but it's also less likely to stick out of the poly (you can run your finger over the letters in our first table and feel a tiny ridge). If I were you I would get heavy paper, and then just poly the hell out of it (5 coats, wait 24 hours between each coat). Oh, and get a clearcoat/polyurethane that goes on clear. The white parts on your table (if any) will get a brownish tint otherwise. Graphics For the graphics on our basketball court table (ACC text and the flag) we went to the actual court and just took some digital pictures. With a little help in Photoshop, we were then able to get the graphics the right size and shape (for example, taking a picture of the "ACC" meant that it was kind of like a trapezoid, with the top part of the text not as wide as the bottom, since I took a picture from an angle as opposed to a bird's eye view). Anywho, for those we just went to Kinko's and printed it out on their good computer and color printer. Then we glued it on and polyeurethaned over it. Keep in mind you can always look for graphics online and just print them out (Google has an Image search feature that works well). Sturdy construction We do not have any plans drawn out (well, not on my computer anyway), but it's pretty easy to make a sturdy table. If you've got over $150 allocated for this, do not spare any expense on quality. 3/4" pine plywood is the sturdiest non-expensive board you can get. It will come in an 8'x4' section, but feel free to cut it down (but 8x4 is a nice size). If you've got money to waste, you can even get 3/4" oak. It will look better and is sturdier. You are going to want to build a sturdy frame underneath the table. A complete border of 2x4s should lay underneath the plywood. This not only looks good, but provides most of the anti-warping support. You are also going to want to spend the extra couple of bucks for two more 8' lengths of 2x4s to lay lengthwise along the underneath of the table (so you will have something like four 8-foot 2x4s underneath the table lengthwise, and then two 4-foot lengths at the edge). Legs are pretty easy. We use 4x4's, which is sturdy as hell but does not look great. If you paint them, they might look fine. In any event, a 3/4" plywood with the said frame underneath will never warp, and can even handle a few drunk college boys standing on top of it (not that I would suggest that). Misc Also, get trim for the edge of the table. It's $1/ft. and well worth it. It makes the table look much better, and even stops the occasional ball from rolling off. And to make sure that the table can handle all the beer that will get spilled, use a ton of polyurethane/clearcoat. If you have the time, do over 5 coats (10 is probably the most you will need). Follow the directions on can, but you should most likely not do more than one coat a day (bubbles could form if it does not dry all the way).
What Else to Do on PS3?
What Else to Do on PS3?
What else to do on PS3?Start renting movies. That's mostly what I use mine for these days. Do you want to know what other games you should buy? First I agree with the guy above me about the Assassins' Creed games and Uncharted 2. They are great games. Here is a list of other games you should check out. Buy them used from gamestop because you have 7 days to return them in case you do not like them or just rent them first. Batman Arkham Asylum-best comic book adaption and a must play Marvel Alliance 1 and 2- great to play with friends, up to 4 Red Dead Redemption-must have single player game, has online too but the single player is better The God of War Collection and God of War 3 Castlevania: Lord of Shadows- similar style to God of War Darksiders-similar style to God of War Mass Effect 2-must have single player Dead Space 1 and 2- best sci-fi horror Fear 2: Project Origin-more sci-fi horror Silent Hill Homecoming- eeriest horror Condemned 2- Metal Gear Solid 4-lot's of long cut-scenes but terrific story and gameplay. especially the boss battles Resistance 2 Army of Two: 40th Day-much better online but can play co-op on same screen Borderlands- it is better played online with a friend or 2 Heavenly Sword-short game but stunning production Saints Row 2- looser more over-the-top style of GTA Oblivion-best rpg Brutal Legend-great if you like heavy metal music and lore Transformers War for Cybertron Red Faction Guerrilla- the best destruction engine that allows you to break almost anything Fallout 3-must have single player game Prince of Persia Valkyria Chronicles-amazing game that is often overlooked Far Cry 2-slightly different fps than most with great African setting and good story Heavy Rain-best adult psychological thriller Pure- best atv racing NBA 2k 11-best basketball Fight Night Round 4-much better than 3, and the new Fight Night Champions Just Cause 2-adrenaline rush, open world gameplay Ratchet and Clank: A Crack in Time-best in the series The Sly Collection Civilization Revolution-great strategy Sonic Ultimate Genesis Collection-over 40 classic titles Soulcaliber 4-best 3d fighter The Orange Box- 4 great games in one Yakuza 3- Japanese mob story with fun side challenges— — — — — —Do you play any special floor time games with your baby such as "pattycake or peek-a-boo"? Any other games?I usually crawl behind him and he looks right behind me to see if I am following him and then he goes faster and starts laughing cause he thinks its funny. He also has this activity table where I just take off the legs and while he is sitting down we play with it together— — — — — —Is MGS4 worth getting a Playstation 3 for even if your not interested in other games but a fan of MGS series ?MGS4 is suppose to be the final chapter of Metal gear solid series at least for snake it is. This game was probably the main reason many people decided to get a ps3 just because of this game. This game is a visual masterpiece and the gameplay is aweesomee. This game has everything that a movie has and at the same time you are playing it. It has suspense,action, some humor and overall a fantastic conclusion (in my opinion) to the MGS franchise. This game is honestly a must have for the ps3. The only down side of this game is if you are one of those people who could give a rats *** about the story line and just want to play then you wont get the full experience. Some people say that movie scenes are way to long ,but thats because if you never played the MGS franchise it tries to explain everything and so that it basically breaks down the whole MGS franchise. I played that game twice already and probably going to play it again once i get it back from my friend. To me it was a piece of art and action packed game ,but everyone has the same opinion as i do. So its up to you man— — — — — —Would the video game industry be the same without Mario? What other games has Mario influenced?The video game industry would be VERY different w/o Mario. Mario is an icon in his own name. Super Mario Brothers would not exist.the Nintendo would not have been developed (or have made millions of dollars), arcade games would not be the same, Donkey Kong would need someone else to throw barrels at, Sonic would need someone else to copy (then create his own multi-million dollar franchise).Mario has influenced the game world greatly. .If Mario were gone. .through a VERY VERY VERY VERY VERY long series of gaming relationships.Halo would not exist.NOOOOOOOOOOOOOOO.
How to Protect Data on IOT Devices
How to Protect Data on IOT Devices
Before obtaining internet of things devices or solutions, please first ensure their design security. In some environments, this may not be feasible due to factors such as traditional products, price points, or simply because you don't have enough details on how to protect them.If the provider is unable to provide sufficient information about device security methods, it should reconsider purchasing IOT devices. If the IOT device is already in place, security can be established around it.In addition, it should also ensure that manufacturers of Internet of things devices can provide timely patches and updates for the whole lifeline of the device. After the product entered the market, many security vulnerabilities were found. Since the service life of IOT devices may be as long as 10 to 20 years, their manufacturers should be able to provide you with patches and updates during this period.Here are eight effective ways to protect data on IOT devices.1. Learn about the advantages of connecting to the InternetDon't connect smart devices to the Internet just because they have functions. First, you should check the functions available in your device without connecting it to the Internet. You may find that your smart device has good functions and can be used without the Internet. In this case, it is best to use the device offline. This is a good way to protect your safety without spending any money.2. Use auxiliary networkMost of the time, your WiFi router can create multiple networks to help you create restricted access for family and guests. You should also consider creating an additional network for IOT devices. When accessing a connection through a smart device, this will help you prevent unauthorized access to sensitive data. Having a separate connection to act as a buffer will help ensure that no external entities are allowed to access your shared files and other types of encrypted data.3. Continue to change the passwordIt is important that you constantly change your passwords on your PC, personal accounts, and mobile devices. It should also be remembered that it is equally important to change the password used on IOT devices. Use these passwords carefully and ensure that each device has a unique password. You can use the password manager to remember your password, or even use traditional pen and paper methods. Remember that each password must be changed twice a year.4. Do not enable universal plug and playAlmost all smart devices have a function called UPnP. With this feature, different devices can find each other and connect to each other. This feature makes devices more convenient because you do not need to configure each device separately. However, you need to know that the UPnP protocol uses the local network for connection, so it is easy to be accessed from the outside. In the event of an attack, external entities may be able to access multiple devices at the same time. Therefore, it is best to turn off the UPnP function on each device.5. Update each deviceYou should enable automatic update and there is no automatic update. Please check the firmware update regularly. This is required because it is the way to install a new security patch on the device. As hackers and other intruders continue to come up with new ways to invade IOT devices, technology manufacturers continue to strive to deal with such threats with security measures. Therefore, ensuring that all devices are updated will help to enhance the security of the whole system.6. Reduce the use of cloud technologyAs you know, most IOT providers provide free cloud storage with their devices. The reason is that it is considered an emerging technology. However, this technology has some potential disadvantages. The first is that if you want to access the data stored in the cloud, you need an active connection. Without a connection, you can't access the information. Second, when you access your account, outsiders may invade your connection. So before you start using the cloud, make sure you are familiar with how to protect data security and thoroughly understand privacy measures.7. Pay attention to the storage location of wearable devicesWearable devices use WiFi connections to collect and store personal data so that they can provide you with accurate analysis in the future. Therefore, when you bring a wearable device to a public place, because it is connected to public WiFi, anyone connected to the same network can immediately access your data. Therefore, it is best to avoid wearing wearable devices with shared networks. In case you really want to use it, make sure to disable it when you are not using the device.8. Avoid using risky equipmentSome IOT devices need to be continuously connected to the Internet to operate effectively. Others don't bring much efficiency to your life as you think. Therefore, it is a good habit to evaluate the practicability of the equipment from time to time. If you think they don't help your life, or they seem risky, it's best to discard them. In addition, if only one device can replace multiple other devices, invest in the device. This is because the fewer equipment used, the fewer risk factors.
pas de données

Copyright © 2020 Coffee bag - Guangzhou tianci packaging industry Co,. Ltd. | Sitemap